FireCADCalc

Molasses Dilution to Mash Brix

Water to dilute molasses to a mash brix, the mash produced and its volume, by a solids balance on brix.

Distillery and ethanol

Inputs

Examples: 435 t/d to 25 brixTo 30 brix

Results

Part of the dilution can be recycled spent wash or polished condensate in ZLD plants. The balance treats all dilution as solids-free water: recycled spent wash carries its own solids, so with it the mash brix comes out above the target.

Dilution water580.00t/d
Mash880.00t/d
Mash volume778.76m³/d

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 435 t/d to 25 brix. The inputs, in the units selected above:

InputValue
Molasses435.00 t/d
Molasses brix86.000 %
Mash brix25.000 %
Mash density1,105.0 kg/m³

Applying the formula below gives:

ResultValue
Dilution water1,061.4 t/d
Mash1,496.4 t/d
Mash volume1,354.2 m³/d

Open this example in the calculator and change any input.

Formula

\(\dot m_m = \dot m_M \frac{Bx_M}{Bx_m}, \quad \dot m_w = \dot m_m - \dot m_M\)

Variables

Symbol Meaning SI unit
\(\dot m_M\) Molasses kg/s
\(Bx_M\) Molasses brix -
\(Bx_m\) Mash brix -
\(\rho_m\) Mash density kg/m³
\(\dot m_w\) Dilution water kg/s
\(\dot m_m\) Mash kg/s
\(\dot V_m\) Mash volume m³/s

Method and standards

Solids balance.

Where it is used

  • Fermentation feed preparation.

Common mistakes

  • Volume used for mass.

Assumptions and limits

  • Brix conserved.
  • The dilution is solids-free water. Recycled spent wash carries dissolved solids that this balance does not count, so the mash brix would exceed the target.

References

  • Solids (brix) balance

Questions and answers

Why dilute molasses?

Yeast cannot ferment at 85 brix; mash is set near 20–30 brix.

Higher mash brix?

Stronger wash and less spent wash, if the yeast tolerates it.

Brix or sugar?

Brix includes non-sugars; the solids balance holds for brix.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.