FireCADCalc

Grain Mill Power by Bond's Law

Specific energy and power for size reduction by Bond's third theory from the work index, the 80 % passing sizes of feed and product and the throughput.

Distillery and ethanolFood, dairy and textile

Inputs

Examples: Hammer mill 4 mm to 0.8 mmFine grind

Per metric tonne. Bond's tables are per short ton: multiply those by 1.1023. The default is a starting value, not a measured figure for grain.

Results

Bond's law was built for ores; for grain use a work index from your own mill tests.

Specific energy2.6464kWh/t
Mill power21.171kW

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Hammer mill 4 mm to 0.8 mm. The inputs, in the units selected above:

InputValue
Bond work index (per metric tonne)12.000 kWh/t
Feed 80 % passing size4.0000 mm
Product 80 % passing size0.80000 mm
Throughput12.000 t/h

Applying the formula below gives:

ResultValue
Specific energy2.3453 kWh/t
Mill power28.143 kW

Open this example in the calculator and change any input.

Formula

\(W = 10\,W_i\left(\frac{1}{\sqrt{P_{80}}} - \frac{1}{\sqrt{F_{80}}}\right)\)

Variables

Symbol Meaning SI unit
\(W_i\) Bond work index J/kg
\(F_{80}\) Feed 80 % passing size m
\(P_{80}\) Product 80 % passing size m
\(\dot m\) Throughput kg/s
\(W\) Specific energy J/kg
\(P\) Mill power W

Method and standards

Bond's law.

Where it is used

  • Grain and coal mill sizing.
  • Energy audits.

Common mistakes

  • Sizes in mm in the formula.

Assumptions and limits

  • Sizes in µm.
  • The work index is per metric tonne; Bond's original values are per short ton and must be multiplied by 1.1023. The default 12 kWh/t has no particular source; Bond's law was built for ores, so back-calculate the index from your own mill.

References

  • Bond (1952) W = 10 W_i (1/√P₈₀ − 1/√F₈₀)
  • sizes in µm

Questions and answers

Why the square root?

Bond's third theory makes energy proportional to new crack length, scaling with 1/√size.

Work index for grain?

Not tabulated reliably: back-calculate from a mill's measured power and sizes.

Finer is better?

Finer flour raises starch conversion but costs power and can hamper separation.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.