FireCADCalc

Pressure to Head of Liquid (Specific Gravity)

Convert a pressure to the head of a liquid column and back from the liquid's specific gravity or density, in metres of liquid and metres of water.

Process steam and utilitiesRefinery and petrochemicalChemical and fertiliser

Inputs

Examples: 300 kPa of oil SG 0.85; 30 m head1 bar of water; 10 mBrine SG 1.2, 50 kPa; 5 m

Results

Head of the liquid p/(ρ g)4.2488m
Head of water5.0986m
Pressure of the head entered58.840kPa

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 300 kPa of oil SG 0.85; 30 m head. The inputs, in the units selected above:

InputValue
Pressure (difference)300.00 kPa
Specific gravity of the liquid (to water at 1000 kg/m³)0.85000 -
Head (to convert to pressure)30.000 m

Applying the formula below gives:

ResultValue
Head of the liquid p/(ρ g)35.990 m
Head of water30.591 m
Pressure of the head entered250.07 kPa

Open this example in the calculator and change any input.

Formula

\(H = \frac{p}{\rho g}, \quad \rho = 1000\, SG\)

Variables

Symbol Meaning SI unit
\(p\) Pressure (difference) Pa
\(SG\) Specific gravity of the liquid (to water at 1000 kg/m³) -
\(H\) Head (to convert to pressure) m
\(H_l\) Head of the liquid p/(ρ g) m
\(H_w\) Head of water m
\(p_H\) Pressure of the head entered Pa

Method and standards

Hydrostatics.

Where it is used

  • Pump selection and gauges.
  • Tank and pipe pressures.

Common mistakes

  • Using water head for other liquids.
  • Gauge and absolute mixed.

Assumptions and limits

  • Incompressible liquid.

References

  • Hydrostatics p = ρ g H (water reference 1000 kg/m³)

Questions and answers

What head is 300 kPa of oil at SG 0.85?

36.0 m of oil, 30.6 m of water.

Why do pumps use head?

A pump gives the same head whatever the liquid; the pressure scales with density.

1 bar is how many metres of water?

10.20 m.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.