Worked example
Example: 300 kPa of oil SG 0.85; 30 m head. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Pressure (difference) | 300.00 kPa |
| Specific gravity of the liquid (to water at 1000 kg/m³) | 0.85000 - |
| Head (to convert to pressure) | 30.000 m |
Applying the formula below gives:
| Result | Value |
|---|---|
| Head of the liquid p/(ρ g) | 35.990 m |
| Head of water | 30.591 m |
| Pressure of the head entered | 250.07 kPa |
Open this example in the calculator and change any input.
Formula
\(H = \frac{p}{\rho g}, \quad \rho = 1000\, SG\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(p\) | Pressure (difference) | Pa |
| \(SG\) | Specific gravity of the liquid (to water at 1000 kg/m³) | - |
| \(H\) | Head (to convert to pressure) | m |
| \(H_l\) | Head of the liquid p/(ρ g) | m |
| \(H_w\) | Head of water | m |
| \(p_H\) | Pressure of the head entered | Pa |
Method and standards
Hydrostatics.
Where it is used
- Pump selection and gauges.
- Tank and pipe pressures.
Common mistakes
- Using water head for other liquids.
- Gauge and absolute mixed.
Assumptions and limits
- Incompressible liquid.
References
- Hydrostatics p = ρ g H (water reference 1000 kg/m³)
Questions and answers
What head is 300 kPa of oil at SG 0.85?
36.0 m of oil, 30.6 m of water.
Why do pumps use head?
A pump gives the same head whatever the liquid; the pressure scales with density.
1 bar is how many metres of water?
10.20 m.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.