Worked example
Example: 10 L/s from 30 mm on a flat plate. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Jet flow | 36.000 m³/h |
| Jet diameter | 30.000 mm |
| Deflection of the jet (90° flat plate, 180° full reversal) | 90.000 ° |
| Liquid density | 998.00 kg/m³ |
Applying the formula below gives:
| Result | Value |
|---|---|
| Jet velocity | 14.147 m/s |
| Force on the plate or vane ρ Q v (1 − cos θ) | 0.14119 kN |
| Kinetic power of the jet | 0.99870 kW |
Open this example in the calculator and change any input.
Formula
\(F = \rho Q v (1 - \cos\theta), \quad v = \frac{Q}{\pi d^2/4}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(Q\) | Jet flow | m³/s |
| \(d\) | Jet diameter | m |
| \(\theta\) | Deflection of the jet (90° flat plate, 180° full reversal) | rad |
| \(\rho\) | Liquid density | kg/m³ |
| \(v\) | Jet velocity | m/s |
| \(F\) | Force on the plate or vane ρ Q v (1 − cos θ) | N |
| \(P\) | Kinetic power of the jet | W |
Method and standards
Momentum change of the jet.
Where it is used
- Nozzle thrust and jet cleaning.
- Fluid mechanics examinations.
Common mistakes
- Using nozzle exit area of a different size.
- Forgetting the cosine term.
Assumptions and limits
- Fixed plate, frictionless.
References
- Linear momentum equation for a control volume (Textbook fluid mechanics (White, Fluid Mechanics))
Questions and answers
10 L/s from a 30 mm nozzle on a flat plate?
Velocity 14.1 m/s; force 141 N.
Why does a cup double the force?
Turning the jet back (180°) changes its momentum twice as much.
Is this a turbine?
A Pelton bucket is close to 180°; moving buckets see the relative velocity.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.