FireCADCalc

Force of a Water Jet on a Plate or Vane

Force of a liquid jet striking a fixed flat plate or a curved vane from the flow, jet velocity and deflection angle, by the momentum equation, with the jet power.

Process steam and utilitiesRefinery and petrochemicalChemical and fertiliser

Inputs

Examples: 10 L/s from 30 mm on a flat platePelton-like cup 165°: 50 L/s, 60 mm45° vane: 5 L/s, 20 mm

Results

Stationary plate or vane, no friction on the vane, force along the jet direction.

Jet velocity14.147m/s
Force on the plate or vane ρ Q v (1 − cos θ)0.14119kN
Kinetic power of the jet0.99870kW

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 10 L/s from 30 mm on a flat plate. The inputs, in the units selected above:

InputValue
Jet flow36.000 m³/h
Jet diameter30.000 mm
Deflection of the jet (90° flat plate, 180° full reversal)90.000 °
Liquid density998.00 kg/m³

Applying the formula below gives:

ResultValue
Jet velocity14.147 m/s
Force on the plate or vane ρ Q v (1 − cos θ)0.14119 kN
Kinetic power of the jet0.99870 kW

Open this example in the calculator and change any input.

Formula

\(F = \rho Q v (1 - \cos\theta), \quad v = \frac{Q}{\pi d^2/4}\)

Variables

Symbol Meaning SI unit
\(Q\) Jet flow m³/s
\(d\) Jet diameter m
\(\theta\) Deflection of the jet (90° flat plate, 180° full reversal) rad
\(\rho\) Liquid density kg/m³
\(v\) Jet velocity m/s
\(F\) Force on the plate or vane ρ Q v (1 − cos θ) N
\(P\) Kinetic power of the jet W

Method and standards

Momentum change of the jet.

Where it is used

  • Nozzle thrust and jet cleaning.
  • Fluid mechanics examinations.

Common mistakes

  • Using nozzle exit area of a different size.
  • Forgetting the cosine term.

Assumptions and limits

  • Fixed plate, frictionless.

References

  • Linear momentum equation for a control volume (Textbook fluid mechanics (White, Fluid Mechanics))

Questions and answers

10 L/s from a 30 mm nozzle on a flat plate?

Velocity 14.1 m/s; force 141 N.

Why does a cup double the force?

Turning the jet back (180°) changes its momentum twice as much.

Is this a turbine?

A Pelton bucket is close to 180°; moving buckets see the relative velocity.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.