Worked example
Example: Air through 1 m of 5 mm spheres, ε 0.4, 0.5 m/s. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Bed depth | 1.0000 m |
| Particle diameter (equivalent sphere) | 5.0000 mm |
| Bed voidage | 40.000 % |
| Sphericity | 1.0000 - |
| Superficial velocity (flow / bed area) | 0.50000 m/s |
| Fluid density | 1.2000 kg/m³ |
| Fluid viscosity | 1.8000e-05 Pa·s |
Applying the formula below gives:
| Result | Value |
|---|---|
| Pressure gradient | 1,288.1 Pa/m |
| Pressure drop over the bed | 1.2881 kPa |
| Viscous term | 0.30375 kPa |
| Inertial term | 0.98437 kPa |
| Particle Reynolds number | 277.78 |
Open this example in the calculator and change any input.
Formula
\(\frac{\Delta p}{L} = 150\, \frac{\mu (1 - \varepsilon)^2 v_s}{\varepsilon^3 (\phi_s d_p)^2} + 1.75\, \frac{\rho (1 - \varepsilon) v_s^2}{\varepsilon^3 \phi_s d_p}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(L\) | Bed depth | m |
| \(d_p\) | Particle diameter (equivalent sphere) | m |
| \(\varepsilon\) | Bed voidage | - |
| \(\phi_s\) | Sphericity | - |
| \(v_s\) | Superficial velocity (flow / bed area) | m/s |
| \(\rho\) | Fluid density | kg/m³ |
| \(\mu\) | Fluid viscosity | Pa·s |
| \(\Delta p/L\) | Pressure gradient, in Pa/m | Pa/m |
| \(\Delta p\) | Pressure drop over the bed | Pa |
| \(\Delta p_v\) | Viscous term | Pa |
| \(\Delta p_i\) | Inertial term | Pa |
| \(Re_p\) | Particle Reynolds number | - |
Method and standards
Ergun's correlation.
Where it is used
- Filters, adsorbers, catalyst beds.
- Fluidised bed design (pressure at minimum fluidisation).
Common mistakes
- Interstitial instead of superficial velocity.
- Guessed voidage.
Assumptions and limits
- Randomly packed bed.
References
- S. Ergun
- Fluid flow through packed columns
- Chem. Eng. Prog. 48 (1952) 89
Questions and answers
Why two terms?
Viscous losses dominate at low Reynolds number, inertial losses at high.
How sensitive is it to voidage?
Very: (1 − ε)²/ε³ means 0.35 instead of 0.40 raises the viscous term by about 75 %.
What velocity?
Superficial: flow divided by the empty bed area.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.