FireCADCalc

Drag Force on a Body

Drag force on a body in a moving fluid from the drag coefficient, frontal area, fluid density and velocity, with the power to overcome it and the dynamic pressure.

Process steam and utilitiesRefinery and petrochemicalChemical and fertiliser

Inputs

Examples: 2 m² board, Cd 1.2, 30 m/s windSphere 0.1 m² in water at 2 m/sCar-like 2.2 m², Cd 0.3, 27.8 m/s

About 0.47 for a sphere, 1.0–1.2 for a cylinder across flow, 1.28 for a flat plate face-on; use test data for your shape.

Results

Dynamic pressure ½ ρ v²1,996.0Pa
Drag force0.093812kN
Power to overcome drag F v0.18762kW

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 2 m² board, Cd 1.2, 30 m/s wind. The inputs, in the units selected above:

InputValue
Drag coefficient1.2000 -
Frontal area2.0000 m²
Fluid density1.2000 kg/m³
Relative velocity30.000 m/s

Applying the formula below gives:

ResultValue
Dynamic pressure ½ ρ v²540.00 Pa
Drag force1.2960 kN
Power to overcome drag F v38.880 kW

Open this example in the calculator and change any input.

Formula

\(F_D = C_D A \frac{\rho v^2}{2}, \quad P = F_D\, v\)

Variables

Symbol Meaning SI unit
\(C_D\) Drag coefficient -
\(A\) Frontal area m²
\(\rho\) Fluid density kg/m³
\(v\) Relative velocity m/s
\(q\) Dynamic pressure ½ ρ v² Pa
\(F_D\) Drag force N
\(P\) Power to overcome drag F v W

Method and standards

Drag equation.

Where it is used

  • Signboards, stacks and conveyors in wind.
  • Vehicle and fan loads.

Common mistakes

  • Wrong reference area.
  • C_D from a different Reynolds range.

Assumptions and limits

  • Steady flow.

References

  • Drag equation F = C_D A ½ρv² (Textbook fluid mechanics (White, Fluid Mechanics))

Questions and answers

2 m² at 30 m/s in air with C_D 1.2?

Dynamic pressure 540 Pa, force 1296 N.

Is this a wind load for design?

Wind codes add gust, height and shape factors; use the code.

Why does power rise so fast?

It goes with v³.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.