Worked example
Example: 10 000 m3/d, 30 mg/L NH4-N, alk 200. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Flow | 10,000 m³/d |
| Ammonia nitrogen nitrified | 30.000 mg/L |
| Influent alkalinity (as CaCO₃) | 200.00 mg/L |
| Alkalinity to keep (as CaCO₃) | 70.000 mg/L |
| Nitrate denitrified (returns alkalinity) | 0 mg/L |
Applying the formula below gives:
| Result | Value |
|---|---|
| Oxygen for nitrification | 1,371.0 kg/d |
| Alkalinity consumed (as CaCO₃) | 214.20 mg/L |
| Alkalinity remaining | -14.200 mg/L |
| Hydrated lime Ca(OH)₂ to add | 623.32 kg/d |
| Or sodium bicarbonate to add | 1,413.4 kg/d |
Open this example in the calculator and change any input.
Formula
\(O_2 = 4.57\,\Delta N\,Q, \quad Alk_c = 7.14\,\Delta NH_4\text{-}N - 3.57\,\Delta NO_3\text{-}N, \quad m_{Ca(OH)_2} = (Alk_{min} - Alk_r)Q\frac{74.09}{100.09}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(Q\) | Flow | m³/s |
| \(\Delta NH_4\text{-}N\) | Ammonia nitrogen nitrified | kg/m³ |
| \(Alk\) | Influent alkalinity (as CaCO₃) | kg/m³ |
| \(Alk_{min}\) | Alkalinity to keep (as CaCO₃) | kg/m³ |
| \(\Delta NO_3\text{-}N\) | Nitrate denitrified (returns alkalinity) | kg/m³ |
| \(\dot m_{O_2}\) | Oxygen for nitrification | kg/s |
| \(Alk_c\) | Alkalinity consumed (as CaCO₃) | kg/m³ |
| \(Alk_r\) | Alkalinity remaining | kg/m³ |
| \(\dot m_{lime}\) | Hydrated lime Ca(OH)₂ to add | kg/s |
| \(\dot m_{NaHCO_3}\) | Or sodium bicarbonate to add | kg/s |
Method and standards
Stoichiometry.
Where it is used
- Activated sludge with nitrification.
- Ammonia-rich industrial effluents.
Common mistakes
- Forgetting alkalinity on low-alkalinity waters.
- Counting denitrification that does not happen.
Assumptions and limits
- Complete nitrification.
- Lime and sodium bicarbonate doses are for 100 % pure chemicals; divide by the product purity.
References
- Metcalf & Eddy
- Wastewater Engineering: Treatment and Resource Recovery
- 5th ed. (McGraw-Hill, 2014)
- ch. 7 (nitrification stoichiometry: 4.57 g O₂ and 7.14 g CaCO₃ per g NH₄-N; denitrification returns 3.57 g CaCO₃ per g NO₃-N)
Questions and answers
Why does nitrification use alkalinity?
Oxidising ammonium to nitrate releases hydrogen ions; without enough alkalinity pH falls and nitrifiers stop working.
How does denitrification help?
Reducing nitrate back to nitrogen gas returns about half the alkalinity, 3.57 g per g N.
What do the defaults give?
10,000 m³/d nitrifying 30 mg/L: 1,370 kg/d of oxygen, 214 mg/L alkalinity used, so about 620 kg/d of lime to keep 70 mg/L.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.