FireCADCalc

Hydraulic Jump: Sequent Depth and Energy Loss

Depth after a hydraulic jump in a rectangular channel from the upstream depth and velocity (Bélanger), with the energy lost and the upstream Froude number.

Process steam and utilitiesRefinery and petrochemicalChemical and fertiliser

Inputs

Examples: 0.3 m deep at 6 m/s, 2 m wideSpillway toe: 0.15 m at 12 m/s, 5 mWeak jump: 0.5 m at 3 m/s

Results

Power with the water density entered. Horizontal rectangular channel, friction in the jump neglected.

Froude number before the jump3.4981
Depth after the jump1.3417m
Head lost (y₂ − y₁)³/(4 y₁ y₂)0.70205m
Power dissipated24.735kW

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 0.3 m deep at 6 m/s, 2 m wide. The inputs, in the units selected above:

InputValue
Depth before the jump0.30000 m
Velocity before the jump6.0000 m/s
Water density (for the power lost)998.00 kg/m³
Channel width (for the power lost)2.0000 m

Applying the formula below gives:

ResultValue
Froude number before the jump3.4981
Depth after the jump1.3417 m
Head lost (y₂ − y₁)³/(4 y₁ y₂)0.70205 m
Power dissipated24.735 kW

Open this example in the calculator and change any input.

Formula

\(Fr_1 = \frac{v_1}{\sqrt{g y_1}}, \quad \frac{y_2}{y_1} = \frac{1}{2}\left(\sqrt{1 + 8 Fr_1^2} - 1\right), \quad \Delta E = \frac{(y_2 - y_1)^3}{4 y_1 y_2}, \quad P_L = \rho g\,v_1 y_1 b\,\Delta E\)

Variables

Symbol Meaning SI unit
\(y_1\) Depth before the jump m
\(v_1\) Velocity before the jump m/s
\(\rho\) Water density (for the power lost) kg/m³
\(b\) Channel width (for the power lost) m
\(Fr_1\) Froude number before the jump -
\(y_2\) Depth after the jump m
\(\Delta E\) Head lost (y₂ − y₁)³/(4 y₁ y₂) m
\(P_L\) Power dissipated W

Method and standards

Momentum across the jump.

Where it is used

  • Spillways and outfalls.
  • Hydraulics examinations.

Common mistakes

  • Using it for sloping channels.
  • Fr from the wrong depth.

Assumptions and limits

  • Horizontal, rectangular.

References

  • Momentum balance across a jump (Bélanger); Chow
  • Open-Channel Hydraulics

Questions and answers

0.3 m deep at 6 m/s: what jump?

Fr₁ 3.50; depth after 1.34 m.

Why build stilling basins?

The jump dissipates energy safely before the water reaches the channel.

What if Fr is below 1?

The flow is already subcritical: there is no jump.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.