FireCADCalc

Pipe Weight per Metre (Empty and Water-Filled)

Mass per metre of a pipe or tube from outside diameter, wall thickness and material density, with the contents when full of water and the total for a length.

BoilerPump

Inputs

Examples: DN150 sch 40 (168.3 x 7.11 mm) steel, water, 6 mBoiler tube 63.5 x 4.06 mm, 6 mStainless DN50 sch 10S (60.3 x 2.77), 7930 kg/m³, 12 m

Carbon steel about 7850 kg/m³; stainless about 7900–8000; copper 8940; aluminium 2700.

Results

Plain pipe: add insulation, cladding, flanges and valves for support loads.

Pipe mass per metre3.9701kg/m
Contents mass per metre when full2.3551kg/m
Full pipe mass per metre6.3252kg/m
Pipe mass for the length47.641kg
Inside diameter54.760mm

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: DN150 sch 40 (168.3 x 7.11 mm) steel, water, 6 m. The inputs, in the units selected above:

InputValue
Outside diameter168.30 mm
Wall thickness7.1100 mm
Material density7,850.0 kg/m³
Contents density (water ≈ 1000)1,000.0 kg/m³
Length6.0000 m

Applying the formula below gives:

ResultValue
Pipe mass per metre28.264 kg/m
Contents mass per metre when full18.646 kg/m
Full pipe mass per metre46.909 kg/m
Pipe mass for the length169.58 kg
Inside diameter154.08 mm

Open this example in the calculator and change any input.

Formula

\(m' = \rho_m\,\pi\,(D_o - t)\,t \qquad m'_f = \rho_f\,\frac{\pi D_i^2}{4},\ D_i = D_o - 2t \qquad m'_t = m' + m'_f \qquad m = m' L\)

Variables

Symbol Meaning SI unit
\(D_o\) outside diameter m
\(t\) wall thickness m
\(\rho_m\) material density kg/m³
\(\rho_f\) contents density kg/m³
\(L\) length m
\(m'\) pipe mass per metre kg/m
\(m'_f\) contents per metre kg/m
\(m'_t\) full pipe per metre kg/m
\(m\) mass of the length kg
\(D_i\) inside diameter m

Method and standards

Exact annulus area times density.

Where it is used

  • Pipe support and hanger loads.
  • Transport and lifting weights.
  • Hydrotest loads.

Common mistakes

  • Using nominal size as outside diameter.
  • Forgetting water at hydrotest.
  • Leaving out insulation.

Assumptions and limits

  • Plain straight pipe.

References

  • Pipe geometry (m' = ρ π (D − t) t)

Questions and answers

What does DN150 schedule 40 steel pipe weigh?

168.3 × 7.11 mm in carbon steel: 28.26 kg/m empty and 46.9 kg/m full of water.

Which density for steel?

About 7850 kg/m³ for carbon steel; stainless is heavier.

Does it include insulation?

No; add insulation and cladding for support design.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.