Worked example
Example: DN150 sch 40 (168.3 x 7.11 mm) steel, water, 6 m. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Outside diameter | 168.30 mm |
| Wall thickness | 7.1100 mm |
| Material density | 7,850.0 kg/m³ |
| Contents density (water ≈ 1000) | 1,000.0 kg/m³ |
| Length | 6.0000 m |
Applying the formula below gives:
| Result | Value |
|---|---|
| Pipe mass per metre | 28.264 kg/m |
| Contents mass per metre when full | 18.646 kg/m |
| Full pipe mass per metre | 46.909 kg/m |
| Pipe mass for the length | 169.58 kg |
| Inside diameter | 154.08 mm |
Open this example in the calculator and change any input.
Formula
\(m' = \rho_m\,\pi\,(D_o - t)\,t \qquad m'_f = \rho_f\,\frac{\pi D_i^2}{4},\ D_i = D_o - 2t \qquad m'_t = m' + m'_f \qquad m = m' L\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(D_o\) | outside diameter | m |
| \(t\) | wall thickness | m |
| \(\rho_m\) | material density | kg/m³ |
| \(\rho_f\) | contents density | kg/m³ |
| \(L\) | length | m |
| \(m'\) | pipe mass per metre | kg/m |
| \(m'_f\) | contents per metre | kg/m |
| \(m'_t\) | full pipe per metre | kg/m |
| \(m\) | mass of the length | kg |
| \(D_i\) | inside diameter | m |
Method and standards
Exact annulus area times density.
Where it is used
- Pipe support and hanger loads.
- Transport and lifting weights.
- Hydrotest loads.
Common mistakes
- Using nominal size as outside diameter.
- Forgetting water at hydrotest.
- Leaving out insulation.
Assumptions and limits
- Plain straight pipe.
References
- Pipe geometry (m' = ρ π (D − t) t)
Questions and answers
What does DN150 schedule 40 steel pipe weigh?
168.3 × 7.11 mm in carbon steel: 28.26 kg/m empty and 46.9 kg/m full of water.
Which density for steel?
About 7850 kg/m³ for carbon steel; stainless is heavier.
Does it include insulation?
No; add insulation and cladding for support design.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.