Worked example
Example: Borderline good. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Settled volume after 30 min (mL/L) | 300.00 - |
| Mixed liquor suspended solids | 3,000.0 mg/L |
Applying the formula below gives:
| Result | Value |
|---|---|
| Sludge volume index (mL/g) | 100.00 |
| Settleability (1 good < 100, 2 fair 100–150, 3 poor > 150) | 2.0000 |
| Return ratio implied SV/(1000 − SV) | 42.857 % |
Open this example in the calculator and change any input.
Formula
\(SVI = \frac{SV_{30} \times 1000}{MLSS}, \quad R = \frac{SV_{30}}{1000 - SV_{30}}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(SV_{30}\) | Settled volume after 30 min (mL/L) | - |
| \(MLSS\) | Mixed liquor suspended solids | kg/m³ |
| \(SVI\) | Sludge volume index (mL/g) | - |
| \(\text{band}\) | Settleability (1 good < 100, 2 fair 100–150, 3 poor > 150) | - |
| \(R\) | Return ratio implied SV/(1000 − SV) | - |
Method and standards
Definitions.
Where it is used
- ETP activated sludge control.
- Operator examinations.
Common mistakes
- MLSS in g/L with the 1000 factor.
- Undiluted dense samples.
Assumptions and limits
- 30-minute settling test; SV₃₀ below 1 000 mL/L (at 1 000 nothing has settled and the implied return ratio is infinite).
References
- SVI = SV₃₀ (mL/L) × 1000 / MLSS (mg/L) (Standard Methods 2710 D)
Questions and answers
300 mL/L settled at 3000 mg/L MLSS?
SVI 100 mL/g, on the line between good and fair; the page puts exactly 100 in the fair band (good is below 100).
High SVI?
Bulking sludge, often filamentous organisms.
Return ratio?
About 0.43 from the settled volume here.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.