FireCADCalc

Return Activated Sludge Ratio

Return activated sludge ratio and flow from a solids balance on the clarifier (MLSS and return sludge concentration) or from the 30-minute settled volume.

Refinery and petrochemicalChemical and fertiliserPulp and paperFood, dairy and textile

Inputs

Examples: MLSS 3000, RAS 10 000Thin RAS

Results

Return ratio X/(X_r − X)100.00%
Return flow1,500.0m³/d
Return ratio from settled volume81.818%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: MLSS 3000, RAS 10 000. The inputs, in the units selected above:

InputValue
Influent flow2,000.0 m³/d
MLSS3,000.0 mg/L
Return sludge concentration10,000 mg/L
Settled volume after 30 min (mL/L)300.00 -

Applying the formula below gives:

ResultValue
Return ratio X/(X_r − X)42.857 %
Return flow857.14 m³/d
Return ratio from settled volume42.857 %

Open this example in the calculator and change any input.

Formula

\(R = \frac{X}{X_r - X}, \quad R_{SV} = \frac{SV_{30}}{1000 - SV_{30}}\)

Variables

Symbol Meaning SI unit
\(Q\) Influent flow m³/s
\(X\) MLSS kg/m³
\(X_r\) Return sludge concentration kg/m³
\(SV_{30}\) Settled volume after 30 min (mL/L) -
\(R\) Return ratio X/(X_r − X) -
\(Q_r\) Return flow m³/s
\(R_{SV}\) Return ratio from settled volume -

Method and standards

Solids balance.

Where it is used

  • ETP control.
  • Operator examinations.

Common mistakes

  • Using SV in % with 1000.
  • Ignoring the wasting stream.

Assumptions and limits

  • Steady state.

References

  • Clarifier solids balance R = X/(X_r − X) (growth and effluent solids neglected)

Questions and answers

MLSS 3000, return sludge 10,000 mg/L?

R = 0.43: about 857 m³/d of return.

Settled volume 300 mL/L?

R about 0.43, consistent here.

Thin return sludge?

Needs more return flow, loading the clarifier.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.