FireCADCalc

Denitrification: Methanol Dose and Sludge (McCarty)

Methanol needed to denitrify nitrate and nitrite and to remove dissolved oxygen, with the biomass produced and alkalinity recovered, by McCarty's equations.

Sugar mill and cogenerationDistillery and ethanolRefinery and petrochemicalChemical and fertiliserPulp and paperFood, dairy and textile

Inputs

Examples: 20 mg/L NO3-N, 1 NO2-N, 2 DOIndustrial 60 mg/L nitrate

Results

McCarty's coefficients include cell synthesis; dose 10–20 % above the stoichiometric value in practice and control it on outlet nitrate.

Methanol concentration needed149.07mg/L
Methanol dose74.535kg/d
Methanol volume (0.791 kg/L)3.9262L/h
Biomass produced31.990mg/L
Alkalinity recovered (as CaCO₃)214.20mg/L

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 20 mg/L NO3-N, 1 NO2-N, 2 DO. The inputs, in the units selected above:

InputValue
Flow10,000 m³/d
Nitrate nitrogen removed20.000 mg/L
Nitrite nitrogen removed1.0000 mg/L
Dissolved oxygen entering2.0000 mg/L

Applying the formula below gives:

ResultValue
Methanol concentration needed52.670 mg/L
Methanol dose526.70 kg/d
Methanol volume (0.791 kg/L)27.744 L/h
Biomass produced11.300 mg/L
Alkalinity recovered (as CaCO₃)74.970 mg/L

Open this example in the calculator and change any input.

Formula

\(C_m = 2.47\,NO_3\text{-}N + 1.53\,NO_2\text{-}N + 0.87\,DO, \quad C_b = 0.53\,NO_3\text{-}N + 0.32\,NO_2\text{-}N + 0.19\,DO\) \(\dot m = C_m Q, \quad \dot V = \frac{\dot m}{791\ \mathrm{kg/m^3}}, \quad Alk = 3.57\,(NO_3\text{-}N + NO_2\text{-}N)\)

Variables

Symbol Meaning SI unit
\(Q\) Flow m³/s
\(NO_3\text{-}N\) Nitrate nitrogen removed kg/m³
\(NO_2\text{-}N\) Nitrite nitrogen removed kg/m³
\(DO\) Dissolved oxygen entering kg/m³
\(C_m\) Methanol concentration needed kg/m³
\(\dot m_{CH_3OH}\) Methanol dose kg/s
\(\dot V\) Methanol volume (0.791 kg/L) m³/s
\(C_b\) Biomass produced kg/m³
\(Alk\) Alkalinity recovered (as CaCO₃) kg/m³

Method and standards

McCarty's equations.

Where it is used

  • Tertiary denitrification filters.
  • Nitrate removal from industrial effluent.

Common mistakes

  • Ignoring DO in the feed.
  • Overdosing and raising effluent BOD.

Assumptions and limits

  • Methanol as the carbon source; methanol density 0.791 kg/L.
  • Alkalinity recovered at 3.57 g as CaCO₃ per g of nitrate or nitrite nitrogen reduced (the denitrification stoichiometry given in Metcalf & Eddy).

References

  • McCarty
  • Beck and St. Amant (1969)
  • Proc. 24th Industrial Waste Conf.
  • Purdue; Metcalf & Eddy
  • Wastewater Engineering: Treatment and Resource Recovery
  • 5th ed. (McGraw-Hill, 2014)
  • ch. 7

Questions and answers

Why include dissolved oxygen?

Oxygen entering the anoxic zone is used first and consumes methanol without removing nitrate.

Is methanol the only carbon source?

No: acetate, glycerol, molasses or the plant's own BOD also work, with different ratios.

What do the defaults give?

20 mg/L nitrate-N, 1 mg/L nitrite and 2 mg/L DO at 10,000 m³/d: 52.7 mg/L methanol, 527 kg/d.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.