FireCADCalc

Vacuum Pan: Water Evaporated and Steam per Strike

Feed syrup, water evaporated and steam per strike of a vacuum pan from the massecuite made, the brix of feed and massecuite and the pan and steam pressures.

Sugar mill and cogenerationIAPWS-IF97 (water and steam)

Inputs

Examples: A strike 60 tC strike on molasses feed

Results

Feed is taken at its boiling point in the pan; the allowance covers losses and any heating of the feed.

Feed per strike61.714t
Water evaporated per strike16.714t
Steam or vapour per strike19.374t

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: A strike 60 t. The inputs, in the units selected above:

InputValue
Massecuite per strike60.000 t
Feed (syrup or molasses) brix65.000 %
Massecuite brix92.000 %
Pan pressure (absolute)16.000 kPa
Heating steam or vapour pressure (absolute)1.8000 bar
Heat losses and sensible heat allowance5.0000 %

Applying the formula below gives:

ResultValue
Feed per strike84.923 t
Water evaporated per strike24.923 t
Steam or vapour per strike28.044 t

Open this example in the calculator and change any input.

Formula

\(M_f = M_m \frac{Bx_m}{Bx_f}, \quad E = M_f - M_m, \quad M_s = \frac{E\,h_{fg}(p_p)(1 + k_l)}{h_{fg}(p_s)}\)

Variables

Symbol Meaning SI unit
\(M_m\) Massecuite per strike kg
\(Bx_f\) Feed (syrup or molasses) brix -
\(Bx_m\) Massecuite brix -
\(p_p\) Pan pressure (absolute) Pa
\(p_s\) Heating steam or vapour pressure (absolute) Pa
\(k_l\) Heat losses and sensible heat allowance -
\(M_f\) Feed per strike kg
\(E\) Water evaporated per strike kg
\(M_s\) Steam or vapour per strike kg

Method and standards

Solids and energy balance.

Where it is used

  • Pan station steam balance.
  • Choosing syrup brix.

Common mistakes

  • Massecuite volume used as mass.

Assumptions and limits

  • Feed at boiling point.
  • The whole strike is built from feed (no footing share; see the pan boiling time calculator for that).
  • The steam must be at a higher pressure than the pan, but the useful temperature difference after the massecuite's boiling-point rise and head is not checked.

References

  • Solids balance and energy balance with IAPWS-IF97 latent heats

Questions and answers

Why boil under vacuum?

Low temperature limits sucrose inversion and colour formation.

Vapour or exhaust for pans?

Vapour from the first or second effect is usual; it saves exhaust (Rillieux).

Why is feed brix important?

A higher syrup brix leaves less water for the pan to evaporate.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.