FireCADCalc

Continuous Vacuum Pan Volume

Working volume of a continuous vacuum pan from the massecuite flow and residence time, per t cane/h, and the batch pan volume it replaces (about 20 % more, Hugot).

Sugar mill and cogenerationTank and drum

Inputs

Examples: C massecuite 200 TCHA massecuite

Suggested from Hugot's continuous pan table (not a figure he states): about 2 h for A, 2.5 h for B and 5 h for C massecuite.

Results

Continuous pans need a regular magma feed of 20 % crystal or more and a steady vacuum and steam supply.

Massecuite flow8.0000m³/h
Continuous pan volume40.000m³
Volume per t cane/h (m³ per t/h)0.20000m³
Equivalent batch volume48.000m³

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: C massecuite 200 TCH. The inputs, in the units selected above:

InputValue
Crushing rate200.00 t/h
Massecuite per tonne cane40.000 L/t
Residence time5.0000 h
Batch volume / continuous volume1.2000 -

Applying the formula below gives:

ResultValue
Massecuite flow8.0000 m³/h
Continuous pan volume40.000 m³
Volume per t cane/h (m³ per t/h)0.20000 m³
Equivalent batch volume48.000 m³

Open this example in the calculator and change any input.

Formula

\(\dot V = A v, \quad V_c = \dot V\tau, \quad V_b = k V_c\)

Variables

Symbol Meaning SI unit
\(A\) Crushing rate kg/s
\(v\) Massecuite per tonne cane m³/kg
\(\tau\) Residence time s
\(k\) Batch volume / continuous volume -
\(\dot V\) Massecuite flow m³/s
\(V_c\) Continuous pan volume m³
\(V_c/A\) Volume per t cane/h m³ per t/h
\(V_b\) Equivalent batch volume m³

Method and standards

Throughput times residence.

Where it is used

  • Selecting continuous pans.
  • Converting batch stations.

Common mistakes

  • Using batch cycle times.
  • Ignoring the magma feed volume.

Assumptions and limits

  • Steady flow.
  • The residence times in the help are derived from Hugot's table, not figures he states; use plant figures where you have them.
  • The massecuite per tonne cane must include the magma (seed) fed to the pan; the magma is not a separate input.

References

  • Hugot
  • Handbook of Cane Sugar Engineering
  • 3rd ed. (Elsevier, 1986)
  • ch. 33
  • continuous pans (Table 33.17 and pp. 711–722)

Questions and answers

Why less volume than batch pans?

No time is lost filling, graining and dropping; Hugot puts the capacity about 20 % higher per m³.

What residence?

Hugot's figures suggest about 2 h for A, 2.5 h for B and 5 h for C.

Do they save steam?

Yes: about 1.2 instead of 1.5 in Hugot's steam formula.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.