FireCADCalc

Crystalliser Sugar Yield and Exhaustion

Sugar a cubic metre of massecuite yields (Hugot eqns 34.2–34.3), exhaustion of the mother liquor (34.4) and crystal % massecuite (34.5), from brix and purities.

Sugar mill and cogeneration

Inputs

Examples: Hugot Table 34.2, AHugot Table 34.2, C

Results

Hugot's Table 34.2: A 95/85/99/65 gives about 840 kg/m³, B about 660, C about 560.

Sugar per m³ of massecuite563.50kg/m³
Exhaustion of sucrose to crystal61.008%
Crystal % massecuite brix35.385%
Sugar per kg massecuite37.567%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Hugot Table 34.2, A. The inputs, in the units selected above:

InputValue
Massecuite brix95.000 %
Massecuite purity85.000 %
Sugar purity99.000 %
Molasses purity after crystallisation65.000 %
Sugar brix100.00 %
Massecuite density1,500.0 kg/m³

Applying the formula below gives:

ResultValue
Sugar per m³ of massecuite838.24 kg/m³
Exhaustion of sucrose to crystal67.227 %
Crystal % massecuite brix57.143 %
Sugar per kg massecuite55.882 %

Open this example in the calculator and change any input.

Formula

\(\frac{Q_s}{V_m} = \frac{B_m d_m}{B_s}\frac{P_m - P_e}{P_s - P_e}, \quad \eta = \frac{P_m - P_e}{P_m(1 - P_e)}, \quad x = \frac{P_m - P_e}{1 - P_e}\)

Variables

Symbol Meaning SI unit
\(B_m\) Massecuite brix -
\(P_m\) Massecuite purity -
\(P_s\) Sugar purity -
\(P_e\) Molasses purity after crystallisation -
\(B_s\) Sugar brix -
\(d_m\) Massecuite density kg/m³
\(Q_s/V_m\) Sugar per m³ of massecuite kg/m³
\(\eta\) Exhaustion of sucrose to crystal -
\(x\) Crystal % massecuite brix -
\(Q_s/Q_m\) Sugar per kg massecuite -

Method and standards

Hugot's crystallisation balances.

Where it is used

  • Judging crystalliser work.
  • Massecuite and sugar forecasts.

Common mistakes

  • Using refractometric and gravity purities together.
  • Using molasses purity before cooling.

Assumptions and limits

  • Pure crystals in x; impure sugar in Q_s.
  • The balances hold on any one purity basis, apparent (pol) or true (sucrose), provided massecuite, sugar and molasses are all on it; the yields are then on that basis.

References

  • Hugot
  • Handbook of Cane Sugar Engineering
  • 3rd ed. (Elsevier, 1986)
  • ch. 34
  • eqns 34.1–34.5 and Table 34.2
  • pp. 725–727

Questions and answers

What is exhaustion?

The share of the massecuite's sucrose that ends as crystal: purity drop over massecuite purity, corrected for the molasses.

Why does cooling help?

Sucrose keeps crystallising as the massecuite cools in the crystallisers, lowering molasses purity by several points.

Sugar brix?

Hugot takes 100 for practical purposes.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.