Worked example
Example: 15 t/h syrup solids. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Syrup dry solids | 15,000 kg/h |
| Syrup purity | 85.000 % |
| Commercial sugar purity | 99.000 % |
| Second sugar purity | 88.000 % |
| Second massecuite purity (first molasses) | 62.000 % |
| Final molasses purity | 38.000 % |
| First massecuite brix | 92.000 % |
| Second massecuite brix | 96.000 % |
| Massecuite density | 1,470.0 kg/m³ |
| Crushing rate | 100.00 t/h |
Applying the formula below gives:
| Result | Value |
|---|---|
| Commercial sugar (dry solids) | 11,557 kg/h |
| Final molasses (dry solids) | 3,442.6 kg/h |
| Second sugar (dry solids) | 3,177.8 kg/h |
| Second massecuite (dry solids) | 6,620.4 kg/h |
| First massecuite (dry solids) | 18,178 kg/h |
| First massecuite purity | 85.524 % |
| First massecuite per tonne cane | 134.41 L/t |
| Second massecuite per tonne cane | 46.913 L/t |
Open this example in the calculator and change any input.
Formula
\(S = S_0\frac{j - m}{s - m}, \quad M = S_0 - S, \quad S_2 = M\frac{p_2 - m}{s_2 - p_2}, \quad Q_2 = M\frac{s_2 - m}{s_2 - p_2}, \quad Q_1 = S_0 + S_2\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(S_0\) | Syrup dry solids | kg/s |
| \(j\) | Syrup purity | - |
| \(s\) | Commercial sugar purity | - |
| \(s_2\) | Second sugar purity | - |
| \(p_2\) | Second massecuite purity (first molasses) | - |
| \(m\) | Final molasses purity | - |
| \(B_1\) | First massecuite brix | - |
| \(B_2\) | Second massecuite brix | - |
| \(\rho_m\) | Massecuite density | kg/m³ |
| \(A\) | Crushing rate | kg/s |
| \(S\) | Commercial sugar (dry solids) | kg/s |
| \(M\) | Final molasses (dry solids) | kg/s |
| \(S_2\) | Second sugar (dry solids) | kg/s |
| \(Q_2\) | Second massecuite (dry solids) | kg/s |
| \(Q_1\) | First massecuite (dry solids) | kg/s |
| \(p_1\) | First massecuite purity | - |
| \(v_1\) | First massecuite per tonne cane | m³/kg |
| \(v_2\) | Second massecuite per tonne cane | m³/kg |
Method and standards
Dry-solids and sucrose balances (SJM).
Where it is used
- Planning boiling schemes.
- Massecuite volumes for pan and crystalliser sizing.
Common mistakes
- Mixing apparent and true purities.
- Forgetting that the seed returns to the first massecuite.
Assumptions and limits
- No losses; second massecuite from first molasses only.
- A second massecuite purity at or above the syrup purity is flagged as unrealistic.
References
- Hugot
- Handbook of Cane Sugar Engineering
- 3rd ed. (Elsevier, 1986)
- ch. 33
- boiling schemes and the SJM balance (eqns 33.36, 39.1–39.3)
- pp. 670–677
Questions and answers
How is the second sugar used?
As seed (footing) for the first massecuite, so all commercial sugar leaves from the first massecuite.
Where does the first molasses go?
It becomes the second massecuite; its purity equals the second massecuite purity in this scheme.
When is two-massecuite enough?
For low-purity juices; richer juices need three massecuites to exhaust the molasses.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.