Worked example
Example: Hugot cross: 85, 60 -> 80. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Purity of the richer product | 85.000 % |
| Purity of the poorer product | 60.000 % |
| Target purity | 80.000 % |
| Brix of the richer product | 65.000 % |
| Brix of the poorer product | 70.000 % |
| Density of the richer product | 1,320.0 kg/m³ |
| Density of the poorer product | 1,350.0 kg/m³ |
Applying the formula below gives:
| Result | Value |
|---|---|
| Dry solids from the richer product | 80.000 % |
| Dry solids from the poorer product | 20.000 % |
| Mass ratio richer / poorer | 4.3077 |
| Volume ratio richer / poorer | 4.4056 |
Open this example in the calculator and change any input.
Formula
\(x_1 = \frac{P_t - P_2}{P_1 - P_2}, \quad x_2 = 1 - x_1, \quad \frac{m_1}{m_2} = \frac{x_1/B_1}{x_2/B_2}, \quad \frac{V_1}{V_2} = \frac{m_1}{m_2}\frac{d_2}{d_1}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(P_1\) | Purity of the richer product | - |
| \(P_2\) | Purity of the poorer product | - |
| \(P_t\) | Target purity | - |
| \(B_1\) | Brix of the richer product | - |
| \(B_2\) | Brix of the poorer product | - |
| \(d_1\) | Density of the richer product | kg/m³ |
| \(d_2\) | Density of the poorer product | kg/m³ |
| \(x_1\) | Dry solids from the richer product | - |
| \(x_2\) | Dry solids from the poorer product | - |
| \(m_1/m_2\) | Mass ratio richer / poorer | - |
| \(V_1/V_2\) | Volume ratio richer / poorer | - |
Method and standards
Linear mixing of sucrose and solids.
Where it is used
- Pan feed planning.
- Magma preparation.
Common mistakes
- Blending apparent with true purities.
- Mixing by volume without density.
Assumptions and limits
- Purities on the same basis.
References
- Hugot
- Handbook of Cane Sugar Engineering
- 3rd ed. (Elsevier, 1986)
- ch. 33
- proportions of materials
- eqns 33.49–33.53
- pp. 692–694
Questions and answers
What is the Cobenze cross?
A diagram for blending: the share of each product is the purity difference of the other product from the target.
Mass or dry solids?
The cross works on dry solids; convert with brix to masses, and with density to volumes.
Where is it used?
Planning pan feeds, magmas and footings to reach a massecuite purity.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.