FireCADCalc

Centrifugal Washing: Sugar Purity and Steam

Purity of washed sugar from the water used (Benz, Hugot eqn 35.44) and the steam a washing nozzle passes (eqn 35.45), per cycle and per hour.

Sugar mill and cogeneration

Inputs

Examples: 2 % water, 3 kg/cm2 steamLow purity sugar

Per cent of the massecuite, as Benz's formula uses it. Hugot quotes modern washing as 2–5 % on sugar (Deerr up to 10 %): multiply a figure on sugar by the sugar share of the massecuite first.

Results

Hugot's nozzle rule: steam in kg/min per cm² of nozzle roughly equals the steam pressure in kg/cm².

Purity of the washed sugar99.000%
Steam per cycle1.0000kg
Steam per hour20.000kg/h

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 2 % water, 3 kg/cm2 steam. The inputs, in the units selected above:

InputValue
Purity of the sugar unwashed97.000 %
Wash water % massecuite2.0000 %
Steam pressure at the nozzle (gauge)3.0000 kg/cm² g
Nozzle area1.0000 cm²
Steaming time per cycle20.000 s
Cycles per hour20.000 -

Applying the formula below gives:

ResultValue
Purity of the washed sugar99.000 %
Steam per cycle1.0000 kg
Steam per hour20.000 kg/h

Open this example in the calculator and change any input.

Formula

\(P' = 100 - \frac{100 - P}{1 + W}\ [\%], \quad q\ [\mathrm{kg/(min\,cm^2)}] \approx p\ [\mathrm{kg/cm^2}]\)

Variables

Symbol Meaning SI unit
\(P\) Purity of the sugar unwashed -
\(W\) Wash water % massecuite -
\(p\) Steam pressure at the nozzle (gauge) Pa
\(a\) Nozzle area m²
\(t_s\) Steaming time per cycle s
\(N\) Cycles per hour -
\(P'\) Purity of the washed sugar -
\(m_s\) Steam per cycle kg
\(\dot m_s\) Steam per hour kg/s

Method and standards

Benz's correlation and Hugot's nozzle rule.

Where it is used

  • Setting wash times.
  • Steam budgets for centrifugals.

Common mistakes

  • Using W as a fraction in Benz's formula.
  • Absolute instead of gauge steam pressure.

Assumptions and limits

  • Empirical correlations; no validity range is given for Benz's formula. The first per cent of water already halves the impurity, so treat results at very low or high washing (above about 5 %) as indicative.
  • W is per cent of massecuite; a wash figure on sugar must be converted first.

References

  • Hugot
  • Handbook of Cane Sugar Engineering
  • 3rd ed. (Elsevier, 1986)
  • ch. 35
  • washing
  • eqns 35.44–35.45
  • pp. 790–792

Questions and answers

Why not wash more?

Water dissolves crystal; the purity gain costs sugar returned to the pans in the light molasses.

Steam or water?

Steam dissolves less and keeps the sugar hot; Hugot advises no washing of C massecuite in batch machines.

How is W counted in Benz's formula?

As a percentage of massecuite: 2 % gives 1 + 2 in the denominator.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.