Worked example
Example: Plantation white. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Size at the 16 % point of the cumulative curve | 0.42000 mm |
| Size at 50 % cumulative (median) | 0.60000 mm |
| Size at the 84 % point of the cumulative curve | 0.78000 mm |
Applying the formula below gives:
| Result | Value |
|---|---|
| Mean aperture | 0.60000 mm |
| Coefficient of variation | 30.000 % |
Open this example in the calculator and change any input.
Formula
\(MA = d_{50}, \quad CV = \frac{|d_{84} - d_{16}|}{2\,d_{50}}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(d_{16}\) | Size at the 16 % point of the cumulative curve | m |
| \(d_{50}\) | Size at 50 % cumulative (median) | m |
| \(d_{84}\) | Size at the 84 % point of the cumulative curve | m |
| \(MA\) | Mean aperture | m |
| \(CV\) | Coefficient of variation | - |
Method and standards
Powers.
Where it is used
- Pan control.
- Sugar grading.
Common mistakes
- Sizes read from a passing curve with the points swapped.
Assumptions and limits
- Near-normal distribution; a clearly skewed curve (16 % and 84 % sizes far from symmetric about the median) is flagged.
- On a retained curve the 16 % size is the coarser one, on a passing curve the finer; either order is accepted and CV uses the spread.
References
- Powers (1948) MA/CV for a normal size distribution: CV = 100 (d84 − d16)/(2 d50)
Questions and answers
What CV is good?
Lower is more uniform; refined sugars aim for a low CV for packing and appearance.
Why 16 and 84 %?
They lie one standard deviation either side of the median for a normal distribution.
Why does uniformity matter for curing?
Fines block the screen and hold molasses.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.