Worked example
Example: 100 t/d for 120 days at 35 °C. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Molasses made | 100.00 t/d |
| Days of storage | 120.00 d |
| True density of molasses | 1,450.0 kg/m³ |
| Entrained air by volume | 10.000 % |
| Free board and dead volume | 10.000 % |
| Storage temperature | 35.000 °C |
| Fermentable loss per year at 30–35 °C | 2.5000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Molasses stored | 12,000 t |
| Bulk density with air | 1,305.0 kg/m³ |
| Tank volume | 10,217 m³ |
| Fermentable loss per year at that temperature | 3.5355 % |
| Loss over the storage period | 1.1624 % |
Open this example in the calculator and change any input.
Formula
\(M = \dot m t, \quad \rho_a = \rho(1 - a), \quad V = \frac{M}{\rho_a(1 - \ell)}, \quad L = L_0\,4^{(T - 32.5)/10}, \quad L_s = L\frac{t}{365\ \mathrm{d}}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\dot m\) | Molasses made | kg/s |
| \(t\) | Days of storage | s |
| \(\rho\) | True density of molasses | kg/m³ |
| \(a\) | Entrained air by volume | - |
| \(\ell\) | Free board and dead volume | - |
| \(T\) | Storage temperature | K |
| \(L_0\) | Fermentable loss per year at 30–35 °C | - |
| \(M\) | Molasses stored | kg |
| \(\rho_a\) | Bulk density with air | kg/m³ |
| \(V\) | Tank volume | m³ |
| \(L\) | Fermentable loss per year at that temperature | - |
| \(L_s\) | Loss over the storage period | - |
Method and standards
Mass balance and Hugot's storage-loss rule.
Where it is used
- Molasses tank farms.
- Distillery feedstock planning.
Common mistakes
- Using true density for tank volume.
- Storing hot molasses.
Assumptions and limits
- Loss rule centred on 32.5 °C; Hugot gives no range for it, so far from 30–35 °C it is an extrapolation. Losses above 100 % are capped and flagged.
- The storage loss assumes all the molasses is held for the whole period, and the tank holds the full production of the period at once with no deduction for the loss.
References
- Hugot
- Handbook of Cane Sugar Engineering
- 3rd ed. (Elsevier, 1986)
- ch. 38
- density and storage of molasses
- pp. 836–837
Questions and answers
Why allow for air?
Molasses holds fine bubbles from the centrifugals and pumping: 10–15 % of the volume.
Why does temperature matter so much?
Sugar losses roughly quadruple per 10 °C; above 40 °C molasses can foam and decompose violently.
Weigh or measure?
Hugot insists on weighing: volume is uncertain because of the air.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.