FireCADCalc

Crystalliser Station Volume (Hugot)

Crystalliser volume for A, B and C massecuites from the crush, massecuite per tonne cane and the time in crystallisers, with Hugot's margin of 1.25 (ch. 34).

Sugar mill and cogenerationTank and drum

Inputs

Examples: Hugot example per 1 TCH x 100Shorter C time

Results

Hugot's example: 95, 50 and 35 L/t cane for 12, 24 and 72 h give about 14, 15 and 32 hL per t cane/h.

A crystallisers142.50m³
B crystallisers150.00m³
C crystallisers315.00m³
Total607.50m³
Volume per t cane/h (m³ per t/h)6.0750m³

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Hugot example per 1 TCH x 100. The inputs, in the units selected above:

InputValue
Crushing rate100.00 t/h
A massecuite per tonne cane95.000 L/t
B massecuite per tonne cane50.000 L/t
C massecuite per tonne cane35.000 L/t
Time for A12.000 h
Time for B24.000 h
Time for C72.000 h
Margin1.2500 -

Applying the formula below gives:

ResultValue
A crystallisers142.50 m³
B crystallisers150.00 m³
C crystallisers315.00 m³
Total607.50 m³
Volume per t cane/h (m³ per t/h)6.0750 m³

Open this example in the calculator and change any input.

Formula

\(V_i = k\,A\,v_i\,t_i, \quad V = \sum V_i\)

Variables

Symbol Meaning SI unit
\(A\) Crushing rate kg/s
\(v_A\) A massecuite per tonne cane m³/kg
\(v_B\) B massecuite per tonne cane m³/kg
\(v_C\) C massecuite per tonne cane m³/kg
\(t_A\) Time for A s
\(t_B\) Time for B s
\(t_C\) Time for C s
\(k\) Margin -
\(V_A\) A crystallisers m³
\(V_B\) B crystallisers m³
\(V_C\) C crystallisers m³
\(V\) Total m³
\(V/A\) Volume per t cane/h m³ per t/h

Method and standards

Hugot's throughput rule.

Where it is used

  • Crystalliser station design.
  • Checking after an expansion.

Common mistakes

  • Using pan volume instead of massecuite per tonne cane.
  • Forgetting the margin.

Assumptions and limits

  • Steady crush.
  • The volume per t cane/h is shown in m³ per t/h in every unit system.

References

  • Hugot
  • Handbook of Cane Sugar Engineering
  • 3rd ed. (Elsevier, 1986)
  • ch. 34
  • capacity of crystallisers
  • pp. 727–729

Questions and answers

Why so long for C?

Low-grade massecuite exhausts slowly; Hugot allows about 72 h to bring the molasses purity down.

Why a margin of 1.25?

For uneven pan drops and the time to fill and empty each crystalliser.

Unit size?

Each crystalliser about 15–20 % larger than the pan that drops into it.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.