Worked example
Example: 30 t crystal, 0.6 mm from 6 um. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Crystal mass to produce per strike | 30.000 t |
| Target mean crystal size | 0.60000 mm |
| Seed crystal size | 6.0000 µm |
| Crystal content of the seed slurry | 250.00 g/L |
| Sucrose crystal density | 1,588.0 kg/m³ |
| Volume shape factor | 0.75000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Seed crystal mass | 30.000 g |
| Seed slurry volume | 0.12000 L |
| Crystals (millions) | 116,615 |
Open this example in the calculator and change any input.
Formula
\(m_s = M_c\left(\frac{L_s}{L_f}\right)^3, \quad N = \frac{M_c}{\rho_c k_v L_f^3}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(M_c\) | Crystal mass to produce per strike | kg |
| \(L_f\) | Target mean crystal size | m |
| \(L_s\) | Seed crystal size | m |
| \(c\) | Crystal content of the seed slurry | kg/m³ |
| \(\rho_c\) | Sucrose crystal density | kg/m³ |
| \(k_v\) | Volume shape factor | - |
| \(m_s\) | Seed crystal mass | kg |
| \(V_s\) | Seed slurry volume | m³ |
| \(N\) | Crystals (millions) | - |
Method and standards
Crystal number balance.
Where it is used
- Pan seeding procedure.
- Crystal size control.
Common mistakes
- Seed size in µm entered as mm.
Assumptions and limits
- All seed grows; no new nuclei. Seed dissolution, conglomerates and the size distribution (mean against mass-mean size) are ignored: in practice more seed is needed.
- The defaults for crystal density (1 588 kg/m³) and shape factor (0.75) are typical values, not from a cited source; enter your own where known.
References
- Crystal number balance: same number of crystals
- mass ∝ L³ (shape factor cancels for the seed mass) (Rein, Cane Sugar Engineering, pan boiling)
Questions and answers
Why so little seed?
Mass grows with the cube of size: growing 100-fold in size multiplies mass a million times.
Full seeding?
Enough seed crystals to give every final crystal its own seed, rather than shock seeding and false grain.
Seed slurry?
Milled sugar in alcohol or saturated syrup; enter its crystal content.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.