Worked example
Example: 1.5 m of A massecuite at 16 kPa. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Absolute pressure in the pan | 16.000 kPa |
| Depth of massecuite above the point | 1.5000 m |
| Massecuite density | 1,470.0 kg/m³ |
| Brix of the mother liquor | 80.000 % |
| Barometric pressure | 101.33 kPa |
Applying the formula below gives:
| Result | Value |
|---|---|
| Pressure at that depth | 37.624 kPa |
| Water saturation temperature at the surface | 55.314 °C |
| Water saturation temperature at depth | 74.392 °C |
| Rise due to the head | 19.078 K |
| Boiling-point elevation of the liquor | 7.9948 K |
| Boiling temperature at that depth | 82.387 °C |
Open this example in the calculator and change any input.
Formula
\(p_h = p + \rho_m g h, \quad \Delta T_h = T_s(p_h) - T_s(p), \quad T_b = T_s(p_h) + e(B)\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(p\) | Absolute pressure in the pan | Pa |
| \(h\) | Depth of massecuite above the point | m |
| \(\rho_m\) | Massecuite density | kg/m³ |
| \(B\) | Brix of the mother liquor | - |
| \(p_a\) | Barometric pressure | Pa |
| \(p_h\) | Pressure at that depth | Pa |
| \(T_s\) | Water saturation temperature at the surface | K |
| \(T_h\) | Water saturation temperature at depth | K |
| \(\Delta T_h\) | Rise due to the head | K |
| \(e\) | Boiling-point elevation of the liquor | K |
| \(T_b\) | Boiling temperature at that depth | K |
Method and standards
Hydrostatics with IF97 and Hugot's boiling-point elevation.
Where it is used
- Pan design and strike height.
- Explaining slow boiling of tall strikes.
Common mistakes
- Using water density.
- Forgetting the elevation of the liquor.
Assumptions and limits
- Liquid column without vapour (conservative).
- The boiling-point elevation is Hugot's formula for pure sucrose solutions, with no purity input: for low-purity mother liquors (B and C massecuites) the true elevation is higher.
- The vacuum in the elevation formula is the barometric pressure entered less the pressure at depth, in cmHg.
References
- Hugot
- Handbook of Cane Sugar Engineering
- 3rd ed. (Elsevier, 1986)
- ch. 33
- hydrostatic pressure in pans
- p. 647
- and boiling-point elevation
- ch. 32
- Saturation temperatures from IAPWS-IF97
Questions and answers
Why does the head matter so much in pans?
At 16 kPa absolute a metre of massecuite adds about 14 kPa: the boiling point at the tubes rises by 15–20 °C.
What does it do to boiling?
The temperature difference to the steam shrinks, so the lower part of a tall strike hardly evaporates.
Why add the elevation?
Massecuite liquor at 80 brix boils several degrees above water at the same pressure.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.