Worked example
Example: Hugot: 0.35 mm, ratio 9. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Mean crystal size in the footing | 0.35000 mm |
| Footing volume | 5.0000 m³ |
| Final strike volume | 45.000 m³ |
Applying the formula below gives:
| Result | Value |
|---|---|
| Volume ratio | 9.0000 |
| Final crystal size | 0.72803 mm |
| Crystal surface per mass, footing | 0.012029 m²/g |
| Crystal surface per mass, final | 0.005783 m²/g |
Open this example in the calculator and change any input.
Formula
\(l_2 = l_1\sqrt[3]{\frac{V_2}{V_1}}, \quad s = \frac{0.00421}{l}\ [\mathrm{m^2/g};\ l\ \mathrm{mm}]\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(l_1\) | Mean crystal size in the footing | m |
| \(V_1\) | Footing volume | m³ |
| \(V_2\) | Final strike volume | m³ |
| \(V_2/V_1\) | Volume ratio | - |
| \(l_2\) | Final crystal size | m |
| \(s_1\) | Crystal surface per gram, footing (m²/g) | - |
| \(s_2\) | Crystal surface per gram, final (m²/g) | - |
Method and standards
Hugot's crystal-number argument.
Where it is used
- Planning footings and cut strikes.
- Setting grain size targets.
Common mistakes
- Comparing strikes of different crystal content.
- Ignoring conglomerates.
Assumptions and limits
- Constant crystal count and content.
References
- Hugot
- Handbook of Cane Sugar Engineering
- 3rd ed. (Elsevier, 1986)
- ch. 33
- magma and grain growth (p. 714) and eqn 33.45 (crystal surface)
Questions and answers
Why the cube root?
At the same crystal content, crystal mass grows with the volume; for the same number of crystals, size grows with the cube root of mass.
Why does surface matter?
Crystallisation rate is proportional to crystal surface; fine grain exhausts molasses faster but is harder to purge.
What breaks the rule?
False grain or dissolving grain changes the crystal count.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.