FireCADCalc

Grain Growth from Footing to Strike

Crystal size after building a footing to a strike at constant crystal content (cube root of the volume ratio, Hugot p. 714) and crystal surface per gram.

Sugar mill and cogeneration

Inputs

Examples: Hugot: 0.35 mm, ratio 9C footing 0.17 mm

Results

Hugot's example: a footing nine times smaller than the strike grows 0.35 mm grain to about 0.73 mm. Holds only if no new grain forms.

Volume ratio5.0000
Final crystal size0.29070mm
Crystal surface per mass, footing0.024765m²/g
Crystal surface per mass, final0.014482m²/g

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Hugot: 0.35 mm, ratio 9. The inputs, in the units selected above:

InputValue
Mean crystal size in the footing0.35000 mm
Footing volume5.0000 m³
Final strike volume45.000 m³

Applying the formula below gives:

ResultValue
Volume ratio9.0000
Final crystal size0.72803 mm
Crystal surface per mass, footing0.012029 m²/g
Crystal surface per mass, final0.005783 m²/g

Open this example in the calculator and change any input.

Formula

\(l_2 = l_1\sqrt[3]{\frac{V_2}{V_1}}, \quad s = \frac{0.00421}{l}\ [\mathrm{m^2/g};\ l\ \mathrm{mm}]\)

Variables

Symbol Meaning SI unit
\(l_1\) Mean crystal size in the footing m
\(V_1\) Footing volume m³
\(V_2\) Final strike volume m³
\(V_2/V_1\) Volume ratio -
\(l_2\) Final crystal size m
\(s_1\) Crystal surface per gram, footing (m²/g) -
\(s_2\) Crystal surface per gram, final (m²/g) -

Method and standards

Hugot's crystal-number argument.

Where it is used

  • Planning footings and cut strikes.
  • Setting grain size targets.

Common mistakes

  • Comparing strikes of different crystal content.
  • Ignoring conglomerates.

Assumptions and limits

  • Constant crystal count and content.

References

  • Hugot
  • Handbook of Cane Sugar Engineering
  • 3rd ed. (Elsevier, 1986)
  • ch. 33
  • magma and grain growth (p. 714) and eqn 33.45 (crystal surface)

Questions and answers

Why the cube root?

At the same crystal content, crystal mass grows with the volume; for the same number of crystals, size grows with the cube root of mass.

Why does surface matter?

Crystallisation rate is proportional to crystal surface; fine grain exhausts molasses faster but is harder to purge.

What breaks the rule?

False grain or dissolving grain changes the crystal count.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.