Worked example
Example: Quintuple with bleeding. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Number of effects | 5.0000 - |
| Total evaporation | 200.00 t/h |
| Vapour bled from effect 1 | 40.000 t/h |
| Vapour bled from effect 2 | 25.000 t/h |
| Vapour bled from effect 3 | 10.000 t/h |
| Vapour bled from effect 4 | 0 t/h |
Applying the formula below gives:
| Result | Value |
|---|---|
| Steam with no bleeding (heaters on exhaust) | 115.00 t/h |
| Exhaust steam with bleeding | 91.000 t/h |
| Steam saved by bleeding | 24.000 t/h |
| Evaporation per kg of steam | 2.1978 |
Open this example in the calculator and change any input.
Formula
\(S = \frac{E + \sum_i (n - i)\,B_i}{n}, \quad S_0 = \frac{E}{n} + \sum_i B_i, \quad x = \frac{E - \sum_i i\,B_i}{n} \ge 0\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(n\) | Number of effects | - |
| \(E\) | Total evaporation | kg/s |
| \(B_1\) | Vapour bled from effect 1 | kg/s |
| \(B_2\) | Vapour bled from effect 2 | kg/s |
| \(B_3\) | Vapour bled from effect 3 | kg/s |
| \(B_4\) | Vapour bled from effect 4 | kg/s |
| \(S_0\) | Steam with no bleeding (heaters on exhaust) | kg/s |
| \(S\) | Exhaust steam with bleeding | kg/s |
| \(\Delta S\) | Steam saved by bleeding | kg/s |
| \(E/S\) | Evaporation per kg of steam | - |
| \(x\) | Vapour to the condenser | kg/s |
Method and standards
Rillieux's principles.
Where it is used
- Evaporator and pan steam planning.
- Steam % cane reduction projects.
Common mistakes
- Bleeding counted as extra evaporation.
- Vapour from the last effect to the condenser counted as bled.
Assumptions and limits
- Equal evaporation per kg; heat losses ignored.
- The vapour left for the condenser x must not be negative: Σ i B_i may not exceed E.
- With n = 1 (a single effect) bleeding saves its full weight in steam, as Rillieux's i/n = 1.
References
- Rillieux's principles of multiple-effect evaporation and vapour bleeding (Hugot, Handbook of Cane Sugar Engineering)
Questions and answers
What does Rillieux's third principle say?
Vapour bled from effect i of n to replace exhaust saves i/n of its weight in steam.
Why bleed from later effects?
The saving grows with the effect number, but the vapour is cooler.
Is the evaporation per kg of steam really n?
Ideally; heat losses, BPE and flash change it a little.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.