FireCADCalc

Gravity Concentration Criterion and Equal-Settling Ratios

Concentration criterion of a heavy and a light mineral in a fluid, with free-settling (Stokes, Newton) and hindered-settling ratios of equal-settling particles.

Inputs

Examples: Galena and quartz in water, pulp 1.5 (Wills)Gold and quartz in water (Wills: 11.1)Coal and shale in waterCassiterite and quartz in air (dry)

Results

Above 2.5: gravity separation is relatively easy, down to fine sizes.

The size ratios are the diameter of a light particle that settles at the same rate as a heavy one; a feed sized closer than this ratio can be sorted by density.

Concentration criterion11.091
Free-settling ratio, Stokes (laminar) region3.3303
Free-settling ratio, Newton (turbulent) region11.091
Hindered-settling ratio in the pulp13.333

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Galena and quartz in water, pulp 1.5 (Wills). The inputs, in the units selected above:

InputValue
Density of the heavy mineral7.5000 g/cm³
Density of the light mineral2.6500 g/cm³
Density of the fluid1.0000 g/cm³
Pulp density (for hindered settling)1.5000 g/cm³

Applying the formula below gives:

ResultValue
Concentration criterion3.9394
Free-settling ratio, Stokes (laminar) region1.9848
Free-settling ratio, Newton (turbulent) region3.9394
Hindered-settling ratio in the pulp5.2174

Open this example in the calculator and change any input.

Formula

\(CC = \frac{\rho_h - \rho_f}{\rho_l - \rho_f}, \quad \frac{d_l}{d_h}\Big|_{Stokes} = \sqrt{CC}, \quad \frac{d_l}{d_h}\Big|_{Newton} = CC, \quad \frac{d_l}{d_h}\Big|_{hindered} = \frac{\rho_h - \rho_p}{\rho_l - \rho_p}\)

Variables

Symbol Meaning SI unit
\(\rho_h\) Density of the heavy mineral kg/m³
\(\rho_l\) Density of the light mineral kg/m³
\(\rho_f\) Density of the fluid kg/m³
\(\rho_p\) Pulp density (for hindered settling) kg/m³
\(CC\) Concentration criterion -
\(d_l/d_h\) Free-settling ratio, Stokes (laminar) region -

Method and standards

Equal settling of spheres.

Where it is used

  • Screening ores for jigs, spirals and tables.
  • Choosing size ranges for gravity feed.

Common mistakes

  • Using pulp density for free settling.
  • Applying sphere ratios to flaky minerals.

Assumptions and limits

  • Spherical particles; Stokes or Newton drag.

References

  • Wills and Finch
  • Wills' Mineral Processing Technology
  • 8th ed. (Butterworth-Heinemann, 2016)
  • ch. 9
  • eqs. 9.12-9.15 and ch. 10
  • eq. 10.1

Questions and answers

Why does panning work for gold?

Gold and quartz in water have a criterion of 11.1, so gold settles far faster even when finer than the quartz.

Why is the hindered ratio larger?

In a dense pulp the effective fluid density rises toward the light mineral's density, which widens the size range that sorts by density.

What do the defaults represent?

Galena (7.5) and quartz (2.65) in water, and in a pulp of 1.5 (Wills: Stokes 1.99, Newton 3.94, hindered 5.22).

Method and article reviewed by FireCAD engineering on 17 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.