Worked example
Example: SGI 100 min, T80 1,700 µm, no pebble crusher. The inputs, in the units selected above:
| Input | Value |
|---|---|
| SGI test time to 80 % passing 1.7 mm | 100.00 min |
| Transfer size (SAG circuit product, 80 % passing) | 1,700.0 µm |
| Constant K | 5.9000 - |
| Exponent n | 0.55000 - |
| Circuit | Without pebble crusher (f = 1.0) |
| Throughput | 1,500.0 t/h |
Applying the formula below gives:
| Result | Value |
|---|---|
| SAG specific energy | 9.6046 kWh/t |
| SAG mill power | 14,407 kW |
| Circuit factor used | 1.0000 |
Open this example in the calculator and change any input.
Formula
\(E_{SAG} = K\left(\frac{M}{\sqrt{P_{80}}}\right)^n f_{SAG}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(M\) | SGI test time to 80 % passing 1.7 mm | s |
| \(P_{80}\) | Transfer size (SAG circuit product, 80 % passing) | m |
| \(K\) | Constant K | - |
| \(n\) | Exponent n | - |
| \(f_{SAG}\) | Circuit | - |
| \(T\) | Throughput | kg/s |
| \(E_{SAG}\) | SAG specific energy | J/kg |
| \(P\) | SAG mill power | W |
Method and standards
SGI energy equation.
Where it is used
- Geometallurgical throughput models.
- Comparing ore domains for a SAG circuit.
Common mistakes
- Entering the time in seconds.
- Using the ball-mill product size.
Assumptions and limits
- Amelunxen calibration.
References
- Wills and Finch
- Wills' Mineral Processing Technology
- 8th ed. (Butterworth-Heinemann, 2016)
- ch. 5
- eq. 5.10 (Starkey and Dobby, 1996; Amelunxen et al., 2014)
Questions and answers
What is the transfer size?
The 80 % passing size of the SAG circuit product sent to the ball mills, in micrometres.
Why the pebble-crusher factor?
Crushing the critical-size pebbles removes the hardest-to-grind fraction from the SAG mill, saving about 15 % of energy.
What do the defaults represent?
An ore that takes 100 minutes in the SGI test, ground to a 1,700 µm transfer size without a pebble crusher, at 1,500 t/h.
Method and article reviewed by FireCAD engineering on 17 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.