Worked example
Example: Lead-zinc plant: Pb and Zn concentrates and tailings. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Feed rate (dry solids) | 120.00 t/h |
| Metal A in the feed | 4.7800 % |
| Metal A in concentrate 1 | 60.000 % |
| Metal A in concentrate 2 | 2.0000 % |
| Metal A in the tailings | 0.40000 % |
| Metal B in the feed | 7.6600 % |
| Metal B in concentrate 1 | 6.0000 % |
| Metal B in concentrate 2 | 52.000 % |
| Metal B in the tailings | 0.60000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Concentrate 1 yield | 7.0000 % |
| Concentrate 2 yield | 13.000 % |
| Tailings yield | 80.000 % |
| Concentrate 1 rate | 8.4000 t/h |
| Concentrate 2 rate | 15.600 t/h |
| Tailings rate | 96.000 t/h |
| Recovery of metal A to concentrate 1 | 87.866 % |
| Recovery of metal B to concentrate 2 | 88.251 % |
Open this example in the calculator and change any input.
Formula
\(W_1 + W_2 + W_3 = F, \quad W_1 a_1 + W_2 a_2 + W_3 a_3 = F a_f, \quad W_1 b_1 + W_2 b_2 + W_3 b_3 = F b_f\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(F\) | Feed rate (dry solids) | kg/s |
| \(a_f\) | Metal A in the feed | - |
| \(a_1\) | Metal A in concentrate 1 | - |
| \(a_2\) | Metal A in concentrate 2 | - |
| \(a_3\) | Metal A in the tailings | - |
| \(b_f\) | Metal B in the feed | - |
| \(b_1\) | Metal B in concentrate 1 | - |
| \(b_2\) | Metal B in concentrate 2 | - |
| \(b_3\) | Metal B in the tailings | - |
| \(W_1/F\) | Concentrate 1 yield | - |
| \(W_2/F\) | Concentrate 2 yield | - |
| \(W_3/F\) | Tailings yield | - |
| \(W_1\) | Concentrate 1 rate | kg/s |
| \(W_2\) | Concentrate 2 rate | kg/s |
| \(W_3\) | Tailings rate | kg/s |
| \(R_{A1}\) | Recovery of metal A to concentrate 1 | - |
| \(R_{B2}\) | Recovery of metal B to concentrate 2 | - |
Method and standards
n-product formula for three products.
Where it is used
- Lead-zinc and copper-zinc differential flotation.
- Iron ore plants with two concentrates.
Common mistakes
- Using two metals that report together.
- Ignoring a fourth product stream.
Assumptions and limits
- Steady state; exact assays.
References
- Wills and Finch
- Wills' Mineral Processing Technology
- 8th ed. (Butterworth-Heinemann, 2016)
- ch. 3
- eqs. 3.28-3.29 and Table 3.1 (n-product formula)
Questions and answers
How many assays are needed?
For n products you need n − 1 metals assayed on every stream: two metals for a feed, two concentrates and a tailing.
Why can the answer be negative?
Assay errors or a metal that does not separate make the balance ill-conditioned; the feed must lie inside the triangle of the three products.
What do the defaults represent?
A lead-zinc plant at 120 t/h: lead concentrate 60 % Pb, zinc concentrate 52 % Zn, tailings 0.4 % Pb and 0.6 % Zn.
Method and article reviewed by FireCAD engineering on 17 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.