Worked example
Example: 500 m3/day with 10 % hypochlorite. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Water flow | 500.00 m³/d |
| Chlorine demand | 1.5000 mg/L |
| Residual wanted | 0.50000 mg/L |
| Available chlorine of the product (mass fraction, w/w) | 10.000 % |
| Product density (solution) | 1,200.0 kg/m³ |
| Contact time | 30.000 min |
Applying the formula below gives:
| Result | Value |
|---|---|
| Dose D + C_r | 2.0000 mg/L |
| Chlorine per day | 1.0000 kg/d |
| Product per day | 10.000 kg/d |
| Product volume per day | 0.34722 L/h |
| CT value (mg·min/L) | 15.000 |
Open this example in the calculator and change any input.
Formula
\(d = D + C_r, \quad \dot m = Q d, \quad \dot m_p = \frac{\dot m}{x}, \quad CT = C_r\, t\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(Q\) | Water flow | m³/s |
| \(D\) | Chlorine demand | kg/m³ |
| \(C_r\) | Residual wanted | kg/m³ |
| \(x\) | Available chlorine of the product (mass fraction, w/w) | - |
| \(\rho\) | Product density (solution) | kg/m³ |
| \(t\) | Contact time | s |
| \(d\) | Dose D + C_r | kg/m³ |
| \(\dot m\) | Chlorine per day | kg/s |
| \(\dot m_p\) | Product per day | kg/s |
| \(\dot V_p\) | Product volume per day | m³/s |
| \(CT\) | CT value (mg·min/L) | - |
Method and standards
Mass balance.
Where it is used
- Drinking water and cooling water chlorination.
- Dosing pump sizing.
Common mistakes
- Forgetting demand.
- Nominal strength of an old stock.
Assumptions and limits
- Steady flow.
- Available chlorine as a mass fraction. Hypochlorite sold by 'trade %' (g/L of available chlorine divided by 10) is a volume basis: divide it by the density in kg/L for x (10 % trade at 1.2 kg/L is 8.3 % w/w).
References
- Mass balance of available chlorine; CT = residual × contact time (US EPA disinfection practice)
Questions and answers
500 m³/day with 1.5 mg/L demand and 0.5 residual?
2 mg/L dose: 1 kg of chlorine a day, 10 kg of 10 % hypochlorite.
Why does the product lose strength?
Hypochlorite solution decays with time, heat and light; check its strength.
CT?
0.5 mg/L for 30 minutes is 15 mg·min/L.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.