FireCADCalc

Kennedy's Critical Velocity and Canal Check

Kennedy's critical velocity for a canal depth and critical velocity ratio, the actual velocity in a trapezoidal section, and their ratio.

Thermal power plantSugar mill and cogeneration

Inputs

Examples: 15 m³/s, 10 m bed, 1.8 m deepCoarse silt m 1.1, 40 m³/s

Results

Critical velocity0.80119m/s
Actual mean velocity0.76453m/s
Velocity ratio0.95423

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 15 m³/s, 10 m bed, 1.8 m deep. The inputs, in the units selected above:

InputValue
Flow depth1.8000 m
Critical velocity ratio1.0000 -
Discharge54,000 m³/h
Bed width10.000 m
Side slope H:V0.50000 -

Applying the formula below gives:

ResultValue
Critical velocity0.80119 m/s
Actual mean velocity0.76453 m/s
Velocity ratio0.95423

Open this example in the calculator and change any input.

Formula

\(V_0 = 0.55mD^{0.64}, \quad V = \frac{Q}{(B + zD)D}\)

Variables

Symbol Meaning SI unit
\(D\) Flow depth m
\(m\) Critical velocity ratio -
\(Q\) Discharge m³/s
\(B\) Bed width m
\(z\) Side slope H:V -
\(V_0\) Critical velocity m/s
\(V\) Actual mean velocity m/s
\(V/V_0\) Velocity ratio -

Method and standards

Kennedy's equation.

Where it is used

  • Checking existing canals.
  • Exam problems.

Common mistakes

  • Using FPS constant 0.84 with SI units.
  • Ignoring the side slope in area.

Assumptions and limits

  • Alluvial canals.
  • V/V₀ within ±5 % of 1 is treated as non-silting, non-scouring; outside that band silting or scouring is flagged (an engineering tolerance, not part of Kennedy's equation).

References

  • Kennedy's equation V₀ = 0.55mD^0.64 (SI) (Garg, Irrigation Engineering and Hydraulic Structures (Khanna))

Questions and answers

What is the critical velocity ratio?

m adjusts Kennedy's equation for silt: about 1.0 for Upper Bari Doab silt, 1.1–1.2 for coarser, 0.8–0.9 for finer.

Is Kennedy still used?

Mostly in teaching and checks; Lacey's regime theory replaced it for design.

What do the defaults represent?

A 15 m³/s canal 10 m wide and 1.8 m deep with 1:2 (0.5) side slopes.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.