Worked example
Example: R/C about 1. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Reducing sugars % molasses | 14.000 % |
| Sulphated ash % molasses | 13.000 % |
| Non-sucrose % molasses (dry solids − sucrose) | 44.000 % |
| Actual true purity of final molasses | 42.000 % |
| Mixed juice purity | 85.000 % |
| Sucrose % cane | 13.000 % |
| Mill extraction | 95.000 % |
| Crushing rate | 100.00 t/h |
Applying the formula below gives:
| Result | Value |
|---|---|
| Target, SRI 40.67 − 17.8 log(R/C) | 40.097 % |
| Target, South Africa 39.94 − 19.6 log(R/C) | 39.309 % |
| Target, general 40 − 18.5 log(R/C) | 39.405 % |
| Target, Réunion 40 − 4R/C | 35.692 % |
| Target, Douwes Dekker 36 − 0.08r + 0.26c | 41.136 % |
| Gap: actual − general target | 2.5954 % |
| Boiling-house recovery lost | 1.2474 % |
| Sucrose lost | 154.05 kg/h |
Open this example in the calculator and change any input.
Formula
\(P_{SRI} = 40.67 - 17.8\log\frac{R}{C}, \quad P_{SA} = 39.94 - 19.6\log\frac{R}{C}, \quad P_g = 40 - 18.5\log\frac{R}{C}, \quad P_R = 40 - 4\frac{R}{C}\)
\(P_{DD} = 36 - 0.08r + 0.26c, \quad r = \frac{100R}{NS}, \quad c = \frac{100C}{NS}, \quad m = P_g\)
\(\Delta\rho = \Delta P\frac{1 - j}{j(1 - m)^2}, \quad \Delta\dot m = \Delta\rho\,S_c\,e\,A\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(R\) | Reducing sugars % molasses | - |
| \(C\) | Sulphated ash % molasses | - |
| \(NS\) | Non-sucrose % molasses (dry solids − sucrose) | - |
| \(P_a\) | Actual true purity of final molasses | - |
| \(j\) | Mixed juice purity | - |
| \(S_c\) | Sucrose % cane | - |
| \(e\) | Mill extraction | - |
| \(A\) | Crushing rate | kg/s |
| \(P_{SRI}\) | Target, SRI 40.67 − 17.8 log(R/C) | - |
| \(P_{SA}\) | Target, South Africa 39.94 − 19.6 log(R/C) | - |
| \(P_g\) | Target, general 40 − 18.5 log(R/C) | - |
| \(P_R\) | Target, Réunion 40 − 4R/C | - |
| \(P_{DD}\) | Target, Douwes Dekker 36 − 0.08r + 0.26c | - |
| \(\Delta P\) | Gap: actual − general target | - |
| \(\Delta\rho\) | Boiling-house recovery lost | - |
| \(\Delta\dot m\) | Sucrose lost | kg/s |
| \(r\) | Reducing sugars on non-sucrose, per cent | - |
| \(c\) | Ash on non-sucrose, per cent | - |
| \(m\) | Target purity used for the recovery loss (the general target) | - |
Method and standards
Empirical target-purity formulae cited by Hugot.
Where it is used
- Judging molasses exhaustion.
- Valuing better crystallisation.
Common mistakes
- Using apparent purity against true targets.
- Ash by carbonate instead of sulphate.
Assumptions and limits
- Formulae fitted to cane molasses of normal composition; a target purity outside 20–60 % is flagged as an extrapolation (the Réunion form can even go negative).
- The gap and the recovery lost are measured against the general target P_g only.
References
- Hugot
- Handbook of Cane Sugar Engineering
- 3rd ed. (Elsevier, 1986)
- ch. 33
- eqns 33.37–33.42
- pp. 679–681; ch. 39
- eqn 39.6
- p. 841
Questions and answers
Why does R/C matter?
Reducing sugars lower and ash raises the purity to which molasses can be exhausted; their ratio predicts the target.
True or apparent purity?
The formulae give true purity; compare like with like.
What is the gap worth?
Hugot's derivative: about 0.36–0.5 points of boiling-house recovery per point of molasses purity.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.