FireCADCalc

Sucrose Solubility and Supersaturation

Solubility of sucrose by Wise and Nicholson, Charles and Verhaar (Hugot eqns 37.1–37.5) and the supersaturation of a liquor from brix, purity and temperature.

Sugar mill and cogeneration

Inputs

Examples: 60 °C, 80 brix, 75 purity20 °C pure check (Table 37.1)

1 for pure solutions; impurities change the solubility of sucrose (Hugot ch. 33). Enter a measured or published value for your liquor: the page has no correlation for it.

Results

Hugot: graining at 1.25–1.40; building the strike at 1.08–1.20; about 1.2 in crystallisers. Above about 1.44 the liquor is labile and false grain forms.

Saturated sucrose % solution, Wise and Nicholson66.320%
Charles66.601%
Verhaar67.119%
Saturated sucrose per water (Wise and Nicholson)1.9691
Sucrose per water in the liquor2.0303
Supersaturation1.0311

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 60 °C, 80 brix, 75 purity. The inputs, in the units selected above:

InputValue
Temperature60.000 °C
Brix of the liquor80.000 %
Purity of the liquor (sucrose on dry solids)75.000 %
Solubility coefficient (impure / pure)1.0000 -

Applying the formula below gives:

ResultValue
Saturated sucrose % solution, Wise and Nicholson74.244 %
Charles74.204 %
Verhaar74.189 %
Saturated sucrose per water (Wise and Nicholson)2.8827
Sucrose per water in the liquor3.0000
Supersaturation1.0407

Open this example in the calculator and change any input.

Formula

\(s_{WN} = 62.77 + 0.1706t + 0.000344t^2, \quad s_{Ch} = 64.4 + 0.0725t + 0.002057t^2 - 0.000009035t^3, \quad s_V = \frac{10\,000}{100 + 0.355(158 - t)}\)

\(q_s = \sigma\frac{s}{100 - s}, \quad q = \frac{BP}{1 - B}, \quad S = \frac{q}{q_s}\)

Variables

Symbol Meaning SI unit
\(t\) Temperature K
\(B\) Brix of the liquor -
\(P\) Purity of the liquor (sucrose on dry solids) -
\(\sigma\) Solubility coefficient (impure / pure) -
\(s_{WN}\) Saturated sucrose % solution, Wise and Nicholson -
\(s_{Ch}\) Charles -
\(s_V\) Verhaar -
\(q_s\) Saturated sucrose per water (Wise and Nicholson) -
\(q\) Sucrose per water in the liquor -
\(S\) Supersaturation -

Method and standards

Solubility fits cited by Hugot.

Where it is used

  • Pan boiling control.
  • Crystalliser and reheater temperatures.

Common mistakes

  • Using massecuite brix instead of mother-liquor brix.
  • Ignoring the solubility coefficient for low purities.

Assumptions and limits

  • Fits for 0–100 °C.
  • Purity is sucrose on dry solids (apparent purity, pol on brix, is the usual factory approximation).
  • The solubility coefficient for impure liquors is the user's value; the page has no correlation for it.
  • Supersaturation above about 1.44 (labile) or below 1 is flagged.

References

  • Hugot
  • Handbook of Cane Sugar Engineering
  • 3rd ed. (Elsevier, 1986)
  • ch. 33 (supersaturation, eqns 33.3–33.5, 33.44) and ch. 37 (solubility, eqns 37.1–37.5, Table 37.1)

Questions and answers

What is supersaturation?

The sucrose-to-water ratio of the liquor over that of a saturated solution at the same temperature and purity.

Why three solubility formulas?

They come from different measurements; Wise and Nicholson's matches Hugot's Table 37.1.

What is the solubility coefficient?

Impurities change how much sucrose water holds; for molasses it can differ from 1 by a fair margin.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.