FireCADCalc

Specific Heat of Massecuite, Molasses and Sugar

Specific heat of massecuite (Hugot eqns 33.1–33.2), of molasses by Janovsky (33.48) and of crystal sugar (36.3), from brix, crystal content, purity and temperature.

Sugar mill and cogeneration

Inputs

Examples: C massecuite 95 brix, 45 % crystalA massecuite

Results

The forms differ: for a massecuite use c₂, which allows for its crystal content; c₁ is the simpler brix-only form. Hugot uses about 0.44 kcal/(kg·°C) for C massecuite in crystalliser calculations (others quote 0.35–0.5), so plant data are worth having.

Massecuite, 1 − 0.007B1.4905kJ/(kg·K)
Massecuite with crystal content1.5226kJ/(kg·K)
Molasses (Janovsky)2.4618kJ/(kg·K)
Crystal sugar 0.2775 + 0.000085t1.1850kJ/(kg·K)

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: C massecuite 95 brix, 45 % crystal. The inputs, in the units selected above:

InputValue
Massecuite or molasses brix95.000 %
Crystal % massecuite45.000 %
Temperature50.000 °C
True purity of the molasses45.000 %
Dry substance of the molasses82.000 %

Applying the formula below gives:

ResultValue
Massecuite, 1 − 0.007B1.4026 kJ/(kg·K)
Massecuite with crystal content1.5020 kJ/(kg·K)
Molasses (Janovsky)2.2848 kJ/(kg·K)
Crystal sugar 0.2775 + 0.000085t1.1796 kJ/(kg·K)

Open this example in the calculator and change any input.

Formula

\(c_1 = 1 - 0.007B, \quad c_2 = 1 - 0.001\left(6 + \frac{\gamma}{60}\right)B, \quad c_M = 1 - [0.6 - 0.0018t + 0.0008(100 - P)]\frac{M}{100}, \quad c_s = 0.2775 + 0.000085t\)

Variables

Symbol Meaning SI unit
\(B\) Massecuite or molasses brix -
\(\gamma\) Crystal % massecuite -
\(t\) Temperature K
\(P\) True purity of the molasses -
\(M\) Dry substance of the molasses -
\(c_1\) Massecuite, 1 − 0.007B J/(kg·K)
\(c_2\) Massecuite with crystal content J/(kg·K)
\(c_M\) Molasses (Janovsky) J/(kg·K)
\(c_s\) Crystal sugar 0.2775 + 0.000085t J/(kg·K)

Method and standards

Formulae as given by Hugot (kcal/(kg·°C); B, γ, P, M in %; t in °C).

Where it is used

  • Crystalliser and reheater heat balances.
  • Dryer and cooler balances.

Common mistakes

  • Entering brix as a fraction in the % forms.
  • Using water's specific heat.

Assumptions and limits

  • Cane sugar products. The source gives no validity ranges for these empirical forms, and they can differ noticeably (for a C massecuite c₁ and c₂ give about 0.34–0.36 kcal/(kg·°C) against the 0.44 Hugot uses in crystalliser work). Prefer c₂ for massecuites and plant data where available.

References

  • Hugot
  • Handbook of Cane Sugar Engineering
  • 3rd ed. (Elsevier, 1986)
  • ch. 33
  • eqns 33.1–33.2 and 33.48; ch. 36
  • eqn 36.3

Questions and answers

Why does crystal content matter?

Crystals have a lower specific heat than the liquor around them.

Which formula for molasses?

Janovsky's form with true purity and dry substance, the same shape as Gucker and Ayres for juices.

Crystal sugar?

About 0.28 kcal/(kg·°C), rising slightly with temperature.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.