Worked example
Example: A massecuite. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Massecuite purity | 86.000 % |
| Crystal purity | 99.500 % |
| Mother liquor (molasses) purity | 66.000 % |
| Massecuite brix | 92.000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Crystal % dry solids | 59.701 % |
| Crystal % massecuite | 54.925 % |
| Purity drop P_m − M | 20.000 % |
Open this example in the calculator and change any input.
Formula
\(c_s = \frac{P_m - M}{S - M}, \quad c_m = c_s\,Bx_m\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(P_m\) | Massecuite purity | - |
| \(S\) | Crystal purity | - |
| \(M\) | Mother liquor (molasses) purity | - |
| \(Bx_m\) | Massecuite brix | - |
| \(c_s\) | Crystal % dry solids | - |
| \(c_m\) | Crystal % massecuite | - |
| \(\Delta P\) | Purity drop P_m − M | - |
Method and standards
Purity balance.
Where it is used
- Pan and crystalliser control.
- Boiling scheme design.
Common mistakes
- Molasses purity from a different strike.
Assumptions and limits
- Apparent purities.
References
- Purity (solids and pol) balance of crystal and mother liquor
Questions and answers
Why is purity drop watched?
A larger drop means more sucrose crystallised and better exhaustion.
Crystal % massecuite vs % solids?
Multiply crystal % solids by the massecuite brix.
Same formula as SJM?
Yes, the same balance with the massecuite in place of juice.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.