FireCADCalc

Final Molasses per Tonne Cane (Hugot) and from Stock

Final molasses % cane from mixed-juice brix, purity, boiling-house recovery and molasses analysis (Hugot eqn 33.43), and molasses from stock (eqn 38.2).

Sugar mill and cogenerationDistillery and ethanol

Inputs

Examples: Hugot exampleRicher juice

Results

Hugot's example: Q 98, B 15, P 85, B_m 95, P_m 40, recovery 90 % and 1 % other losses give 2.96 % cane. The stock line uses pure sugar (s = 100).

Final molasses % cane3.2222%
Final molasses6.4444t/h
Sucrose of the stock product going to molasses24.107%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Hugot example. The inputs, in the units selected above:

InputValue
Mixed juice % cane98.000 %
Mixed juice brix15.000 %
Mixed juice purity85.000 %
Final molasses brix95.000 %
Final molasses purity40.000 %
Boiling-house recovery (sucrose in sugar per sucrose in mixed juice)90.000 %
Other boiling-house losses1.0000 %
Crushing rate100.00 t/h
Purity of a product in stock85.000 %

Applying the formula below gives:

ResultValue
Final molasses % cane2.9593 %
Final molasses2.9593 t/h
Sucrose of the stock product going to molasses11.765 %

Open this example in the calculator and change any input.

Formula

\(q = \frac{Q B P (1 - r - \varepsilon)}{B_m P_m}, \quad M = \frac{P_m(1 - j)}{j(1 - P_m)}\)

Variables

Symbol Meaning SI unit
\(Q\) Mixed juice % cane -
\(B\) Mixed juice brix -
\(P\) Mixed juice purity -
\(B_m\) Final molasses brix -
\(P_m\) Final molasses purity -
\(r\) Boiling-house recovery -
\(\varepsilon\) Other boiling-house losses -
\(A\) Crushing rate kg/s
\(j\) Purity of a product in stock -
\(q\) Final molasses % cane -
\(\dot m_M\) Final molasses kg/s
\(M\) Sucrose of the stock product going to molasses -

Method and standards

Hugot's sucrose balance to molasses.

Where it is used

  • Molasses forecasts for distilleries.
  • Weekly stock corrections.

Common mistakes

  • Using pol and true purities together.
  • Recovery as % cane instead of % sucrose in mixed juice.

Assumptions and limits

  • Steady state.
  • Recovery is sucrose in sugar as a share of sucrose in mixed juice.
  • The stock line is a separate calculation on the same page: it uses only the stock product's purity j and the final molasses purity P_m, with pure sugar (s = 100).

References

  • Hugot
  • Handbook of Cane Sugar Engineering
  • 3rd ed. (Elsevier, 1986)
  • ch. 33
  • eqn 33.43
  • p. 677; ch. 38
  • eqns 38.1–38.2
  • p. 837

Questions and answers

Why does recovery appear?

Sucrose not recovered in sugar and not lost elsewhere ends in the final molasses.

What is the stock line?

For a massecuite or syrup in stock, the share of its sucrose that will end in molasses: 12 % for an 85-purity A massecuite with 40-purity molasses.

Brix of molasses?

Use the same brix basis (refractometric or gravity) as the purity.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.