Worked example
Example: Dense alumina. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Fracture (flexural) strength | 300.00 MPa |
| Poisson's ratio | 0.22000 - |
| Elastic modulus | 300.00 GPa |
| Thermal expansion coefficient | 8.0000 µm/(m·K) |
| Thermal conductivity | 20.000 W/(m·K) |
Applying the formula below gives:
| Result | Value |
|---|---|
| Critical quench ΔT (parameter R) | 97.500 K |
| Heat-flow parameter R′ = kR | 1,950.0 W/m |
Open this example in the calculator and change any input.
Formula
\(R = \frac{\sigma_f(1 - \nu)}{E\alpha}, \quad R' = kR\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\sigma_f\) | Fracture (flexural) strength | Pa |
| \(\nu\) | Poisson's ratio | - |
| \(E\) | Elastic modulus | Pa |
| \(\alpha\) | Thermal expansion coefficient | 1/K |
| \(k\) | Thermal conductivity | W/(m·K) |
| \(R\) | Critical quench ΔT (parameter R) | K |
| \(R'\) | Heat-flow parameter R′ = kR | W/m |
Method and standards
Kingery's parameters.
Where it is used
- Refractory and ceramic selection.
- Sight glasses and burner tiles.
Common mistakes
- Comparing R across different heat transfer regimes.
- Using compressive instead of tensile strength.
Assumptions and limits
- Linear elastic, brittle.
References
- Kingery (1955) thermal stress resistance parameters R = σ_f(1 − ν)/(Eα)
- R′ = kR
Questions and answers
Why does conductivity help?
Heat spreads quickly, so surface and core temperatures stay closer and thermal stress is smaller.
Is R the actual ΔT a part survives?
It is the worst case (sudden quench); real parts with finite heat transfer survive larger ΔT.
What do the defaults represent?
A dense alumina-type ceramic.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.