FireCADCalc

Thermal Expansion: Length, Area and Volume Change

Change in length, area and volume of a solid from its linear expansion coefficient and temperature change, with the final dimensions and the volume coefficient.

Inputs

Examples: 10 m of steel, 20 to 300 °C, 1 m³Aluminium 2 m, 20 to 120 °CSteel rail 25 m, cooled 40 to −10 °C

Results

Constant mean coefficient over the range; for wide ranges use the material's mean coefficient between the two temperatures. Small-strain forms (3α, 2α).

Change in length α L₀ ΔT-14.375mm
Final length24.986m
Volume coefficient 3α34.500µm/(m·K)
Change in volume-3.4500e-04m³
Relative change in area 2α ΔT-0.11500%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 10 m of steel, 20 to 300 °C, 1 m³. The inputs, in the units selected above:

InputValue
Initial length10.000 m
Linear expansion coefficient12.000 µm/(m·K)
Initial temperature20.000 °C
Final temperature300.00 °C
Initial volume (for the volume change)1.0000 m³

Applying the formula below gives:

ResultValue
Change in length α L₀ ΔT33.600 mm
Final length10.034 m
Volume coefficient 3α36.000 µm/(m·K)
Change in volume0.010080 m³
Relative change in area 2α ΔT0.67200 %

Open this example in the calculator and change any input.

Formula

\(\Delta L = \alpha L_0 \Delta T, \quad \beta \approx 3\alpha, \quad \Delta V = \beta V_0 \Delta T\)

Variables

Symbol Meaning SI unit
\(L_0\) Initial length m
\(\alpha\) Linear expansion coefficient 1/K
\(T_1\) Initial temperature K
\(T_2\) Final temperature K
\(V_0\) Initial volume (for the volume change) m³
\(\Delta L\) Change in length α L₀ ΔT m
\(L\) Final length m
\(\beta\) Volume coefficient 3α 1/K
\(\Delta V\) Change in volume m³
\(\Delta A/A\) Relative change in area 2α ΔT -

Method and standards

Linear expansion.

Where it is used

  • Pipework, rails and structures.
  • Fits and clearances.

Common mistakes

  • Instantaneous α for a wide range.
  • °C vs K confusion (differences are equal).

Assumptions and limits

  • Isotropic solid.

References

  • Linear thermal expansion ΔL = α L₀ ΔT (small strain)

Questions and answers

How much does 10 m of steel grow from 20 to 300 °C?

33.6 mm.

Why is volume 3α?

Each of three dimensions grows by α ΔT; second-order terms are negligible.

Which α?

The mean coefficient over the temperature range, from the material data.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.