Worked example
Example: 60 Shore A. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Shore A hardness | 60.000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Young's modulus | 3.6051 MPa |
| Shear modulus | 1.2017 MPa |
Open this example in the calculator and change any input.
Formula
\(E = \frac{0.0981(56 + 7.62336S_A)}{0.137505(254 - 2.54S_A)}\ \mathrm{MPa}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(S_A\) | Shore A hardness | - |
| \(E\) | Young's modulus | Pa |
| \(G\) | Shear modulus | Pa |
Method and standards
Gent's relation.
Where it is used
- Anti-vibration mounts.
- Coupling and seal stiffness.
Common mistakes
- Using Shore D values.
- Expecting better than ±20 %.
Assumptions and limits
- Incompressible rubber; 40–90 Shore A.
References
- Gent (1958)
- Trans. Inst. Rubber Ind. 34: 46 (E from the indentation of the durometer spring)
Questions and answers
Why is G = E/3?
Rubber is nearly incompressible (Poisson's ratio about 0.5).
Where is it used?
Sizing rubber mounts, couplings and gaskets when only the hardness is known.
What do the defaults represent?
A 60 Shore A rubber.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.