Worked example
Example: Default constants at 550 °C. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Constant A (1/s per MPa^n) | 1.0000e+07 - |
| Stress | 80.000 MPa |
| Stress exponent | 5.0000 - |
| Activation energy | 300.00 kJ/mol |
| Temperature | 550.00 °C |
| Creep strain of interest | 1.0000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Creep rate | 10.840 1/h |
| Time to the strain (steady stage) | 9.2253e-04 h |
Open this example in the calculator and change any input.
Formula
\(\dot\varepsilon = A\sigma^n \exp\left(-\frac{Q}{RT}\right)\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(A\) | Constant A (rate in 1/s with σ in MPa) | - |
| \(\sigma\) | Stress | Pa |
| \(n\) | Stress exponent | - |
| \(Q\) | Activation energy | J/mol |
| \(T\) | Temperature | K |
| \(\varepsilon_t\) | Creep strain of interest | - |
| \(\dot\varepsilon\) | Creep rate | 1/s |
| \(t\) | Time to the strain (steady stage) | s |
Method and standards
Norton–Arrhenius.
Where it is used
- High-temperature components.
- Creep testing analysis.
Common mistakes
- Constants fitted in different stress units.
- Extrapolating far beyond the data.
Assumptions and limits
- Secondary creep.
- A is a plain number fitted with the rate in 1/s and the stress in MPa; constants fitted in other units must be converted first.
- The default constants are illustrative only; they give a rate of the order of 1 % in 100 000 h at 80 MPa and 550 °C.
References
- Norton (1929) power law with Arrhenius term ε̇ = A σⁿ e^(−Q/RT)
Questions and answers
The default constants at 80 MPa and 550 °C?
About 1.08 × 10⁻⁷ per hour, so 1 % strain takes about 92 000 h. The default constants are illustrative, not a particular steel; use fitted data for design.
Why does temperature matter so much?
The exponential term: a few tens of degrees can change the rate tenfold.
Boiler tubes?
Use the material's creep rupture data for life; Norton describes deformation.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.