FireCADCalc

kVA to Amps and Amps to kVA Calculator

Current in amperes from apparent power in kVA and voltage, and kVA from amperes, for single-phase and three-phase supplies, generators and transformers.

Thermal power plantProcess steam and utilitiesElectrician and wireman licence examinations

Inputs

Examples: 100 kVA at 415 V three phase; 100 A10 kVA at 230 V single phase; 32 A2 MVA at 11 kV; 80 A

Results

Current for the kVA given43.478A
Apparent power for the current given7.3600kVA

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 100 kVA at 415 V three phase; 100 A. The inputs, in the units selected above:

InputValue
Apparent power100.00 kVA
Voltage (line to line for three phase)415.00 V
SupplyThree phase
Current (to find kVA)100.00 A

Applying the formula below gives:

ResultValue
Current for the kVA given139.12 A
Apparent power for the current given71.880 kVA

Open this example in the calculator and change any input.

Formula

\(I = \frac{S}{\sqrt 3\, V}\ (3\phi), \quad I = \frac{S}{V}\ (1\phi)\)

Variables

Symbol Meaning SI unit
\(S\) Apparent power VA
\(V\) Voltage (line to line for three phase) V
\(\text{phases}\) Supply -
\(I_{given}\) Current (to find kVA) A
\(I\) Current for the kVA given A
\(S_I\) Apparent power for the current given VA

Method and standards

Definition of apparent power.

Where it is used

  • Generator, transformer and UPS ratings.
  • Cable and breaker selection from a kVA figure.

Common mistakes

  • Using phase voltage with √3.
  • Confusing kVA with kW.

Assumptions and limits

  • Balanced three-phase load.

References

  • AC power relations S = V I (1φ)
  • S = √3 V I (3φ)

Questions and answers

How many amps is 100 kVA at 415 V three phase?

139.1 A: I = S / (√3 V).

And single phase at 230 V?

434.8 A: I = S / V.

Does power factor matter?

Not for kVA to amps. It matters when converting kW to amps.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.