Worked example
Example: 400 kW at 240 g/kWh, 8 h a day. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Electrical load on the set | 400.00 kW |
| Specific fuel consumption at that load, per electrical kWh at the terminals | 240.00 g/kWh |
| Fuel density | 840.00 kg/m³ |
| Running hours per day | 8.0000 h |
| Fuel price per litre (your currency) | 90.000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Fuel mass flow | 96.000 kg/h |
| Fuel volume flow | 1.9048 L/min |
| Fuel per day | 914.29 L |
| Electricity per litre of fuel | 3.5000 kWh/L |
| Fuel cost per kWh | 25.714 |
| Fuel cost per day | 82,286 |
Open this example in the calculator and change any input.
Formula
\(\dot m_F = P \cdot SFC, \quad \dot V_F = \dot m_F / \rho, \quad V_d = \dot V_F\, t\)
\(e_L = \rho / SFC, \quad c_{kWh} = c \cdot \frac{SFC}{\rho}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(P\) | Electrical load on the set | W |
| \(SFC\) | Specific fuel consumption at that load, per electrical kWh at the terminals | kg/J |
| \(\rho\) | Fuel density | kg/m³ |
| \(t\) | Running hours per day | s |
| \(c\) | Fuel price per litre (your currency) | - |
| \(\dot m_F\) | Fuel mass flow | kg/s |
| \(\dot V_F\) | Fuel volume flow | m³/s |
| \(V_d\) | Fuel per day | m³ |
| \(e_L\) | Electricity per litre of fuel | J/m³ |
| \(c_{kWh}\) | Fuel cost per kWh | - |
| \(C_d\) | Fuel cost per day | - |
Method and standards
Fuel flow is load times specific fuel consumption from the maker's data at that load; dividing by density gives litres. The cost per kWh is the litres per kWh times the price per litre.
Where it is used
- Budgeting DG running costs.
- Comparing DG power with grid or captive power.
- Checking for fuel theft or a worn engine against expected consumption.
Common mistakes
- Using the full-load SFC at part load (SFC rises as load falls).
- Using kVA instead of kW load.
- Mixing litres at different temperatures.
Assumptions and limits
- Steady load; SFC from the maker at that load.
- SFC per electrical kWh at the generator terminals. An engine data sheet (ISO 3046) gives SFC per shaft kWh: divide it by the alternator efficiency (about 0.93–0.96) first, or the fuel is understated by 4–7 %.
- Fuel cost only.
References
- Specific fuel consumption definition (ISO 8528 / ISO 3046 rating practice)
Questions and answers
How much diesel does a 400 kW load take?
At 240 g/kWh, 96 kg/h, or about 114 L/h at 840 kg/m³; 914 L for 8 hours.
How many units per litre?
3.5 kWh per litre in that case; a well-loaded large set reaches about 4 kWh/L, a lightly loaded small one much less.
What does the fuel cost per kWh?
About 25.7 at 90 per litre, before lubricating oil, maintenance and the set's capital cost.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.