Worked example
Example: 600 m/s at 20°, 250 m/s blades, symmetric, k 0.9, 1 kg/s. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Steam velocity leaving the nozzle | 600.00 m/s |
| Nozzle angle to the plane of the wheel | 20.000 ° |
| Mean blade speed | 250.00 m/s |
| Blade outlet angle | Symmetric blades (outlet = inlet angle) |
| Blade outlet angle (when given) | 30.000 ° |
| Blade velocity coefficient V_r2 / V_r1 | 0.90000 - |
| Steam flow | 3,600.0 kg/h |
Applying the formula below gives:
| Result | Value |
|---|---|
| Whirl velocity at inlet V₁ cos α | 563.82 m/s |
| Flow velocity at inlet V₁ sin α | 205.21 m/s |
| Relative velocity at inlet | 374.96 m/s |
| Blade inlet angle | 33.182 ° |
| Relative velocity at outlet | 337.46 m/s |
| Change in whirl velocity | 596.25 m/s |
| Work per kg of steam U ΔV_w | 149.06 kJ/kg |
| Power developed | 149.06 kW |
| Axial thrust | 20.521 N |
| Diagram (blading) efficiency 2 U ΔV_w / V₁² | 82.812 % |
| Blade speed ratio U / V₁ | 0.41667 |
| Best blade speed ratio cos α / 2 | 0.46985 |
| Maximum diagram efficiency at the best ratio | 83.887 % |
Open this example in the calculator and change any input.
Formula
\(V_{w1} = V_1 \cos\alpha, \quad V_{f1} = V_1 \sin\alpha, \quad \tan\beta_1 = \frac{V_{f1}}{V_{w1} - U}\)
\(V_{r2} = k\, V_{r1}, \quad \Delta V_w = V_{w1} + V_{r2} \cos\beta_2 - U\)
\(w = U\, \Delta V_w, \quad \eta_d = \frac{2 U \Delta V_w}{V_1^2}, \quad \eta_{max} = \frac{\cos^2\alpha}{2}\,(1 + k\, c), \quad c = \frac{\cos\beta_2}{\cos\beta_1}\ (= 1\ \text{for symmetric blades})\)
\(P = \dot m\,w, \quad F_a = \dot m\,(V_{f1} - V_{f2}), \quad V_{f2} = V_{r2}\sin\beta_2\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(V_1\) | Steam velocity leaving the nozzle | m/s |
| \(\alpha\) | Nozzle angle to the plane of the wheel | rad |
| \(U\) | Mean blade speed | m/s |
| \(\text{blades}\) | Blade outlet angle | - |
| \(\beta_2\) | Blade outlet angle (when given) | rad |
| \(k\) | Blade velocity coefficient V_r2 / V_r1 | - |
| \(\dot m\) | Steam flow | kg/s |
| \(V_{w1}\) | Whirl velocity at inlet V₁ cos α | m/s |
| \(V_{f1}\) | Flow velocity at inlet V₁ sin α | m/s |
| \(V_{r1}\) | Relative velocity at inlet | m/s |
| \(\beta_1\) | Blade inlet angle | rad |
| \(V_{r2}\) | Relative velocity at outlet | m/s |
| \(\Delta V_w\) | Change in whirl velocity | m/s |
| \(w\) | Work per kg of steam U ΔV_w | J/kg |
| \(P\) | Power developed | W |
| \(F_a\) | Axial thrust | N |
| \(\eta_d\) | Diagram (blading) efficiency 2 U ΔV_w / V₁² | - |
| \(\rho\) | Blade speed ratio U / V₁ | - |
| \(\rho_{opt}\) | Best blade speed ratio cos α / 2 | - |
| \(\eta_{max}\) | Maximum diagram efficiency at the best ratio | - |
Method and standards
Euler's turbine equation applied to the inlet and outlet velocity triangles of a single impulse stage.
Worked example
Steam leaves the nozzle at 600 m/s at 20° to the wheel plane; mean blade speed 250 m/s; symmetric blades; blade friction factor 0.9.
- V_w1 = 563.8, V_f1 = 205.2 m/s; V_r1 = 375.0 m/s at β₁ = 33.2°
- V_r2 = 337.5 m/s; ΔV_w = 563.8 + 337.5 cos 33.2° − 250 = 596.2 m/s
- Work = 250 × 596.2 = 149.1 kJ/kg; η = 2 × 149 062 / 600² = 82.8 %
Where it is used
- Boiler operator and engineer examinations.
- Understanding steam turbine stage design.
- Checking blade speed against nozzle velocity.
Common mistakes
- Measuring angles from the axis instead of the wheel plane.
- Forgetting the sign of the outlet whirl.
- Using V₁² without the factor 2.
Assumptions and limits
- Single stage, single row; no leakage or windage.
- Angles measured from the plane of the wheel.
- A blade speed above the whirl velocity gives negative work, with a note. If the outlet angle makes the maximum-efficiency ratio unphysical (above 100 %), η_max is not shown.
- With a given outlet angle, a relative inlet angle within 1° of 90° (blade speed equal to the whirl component) is rejected: cos β₁ is then near zero and the maximum efficiency is not defined.
References
- Velocity triangles of an impulse stage (textbook)
Questions and answers
What does steam at 600 m/s, nozzle angle 20°, blade speed 250 m/s give with symmetric blades and k = 0.9?
Blade inlet angle 33.2°, work 149.1 kJ/kg and a diagram efficiency of 82.8 %.
What is the best blade speed?
For symmetric blades, U/V₁ = cos α / 2 = 0.47, giving cos²α (1 + k)/2 = 83.9 %.
Where does the axial thrust come from?
From the change in the flow (axial) velocity across the blades, which friction (k below 1) makes unequal.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.