FireCADCalc

Gas Turbine (Brayton) Cycle Efficiency and Work

Compressor and turbine outlet temperatures, net work, thermal efficiency, back-work ratio and power of a simple gas turbine cycle with real component efficiencies.

Thermal power plantRefinery and petrochemicalSteam turbine

Inputs

Examples: rp 15, 1 200 °C, 86 % / 89 %, 100 kg/srp 8, 900 °C, 82 % / 85 %, 20 kg/srp 30, 1 400 °C, 90 % / 92 %, cp 1 100, k 1.35, 600 kg/s

Results

Air-standard cycle with constant cp and γ; fuel mass, real gas properties and pressure losses are left out.

Compressor outlet temperature406.29°C
Turbine outlet (exhaust) temperature493.70°C
Compressor work393.25kJ/kg
Turbine work709.84kJ/kg
Net work316.59kJ/kg
Heat added797.68kJ/kg
Thermal efficiency39.689%
Ideal (isentropic) cycle efficiency53.871%
Back-work ratio w_c / w_t55.400%
Net power31.659MW

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: rp 15, 1 200 °C, 86 % / 89 %, 100 kg/s. The inputs, in the units selected above:

InputValue
Compressor inlet temperature15.000 °C
Pressure ratio15.000 -
Turbine inlet temperature1,200.0 °C
Compressor isentropic efficiency86.000 %
Turbine isentropic efficiency89.000 %
Specific heat of the air and gas1.0050 kJ/(kg·K)
Ratio of specific heats1.4000 -
Air mass flow360,000 kg/h

Applying the formula below gives:

ResultValue
Compressor outlet temperature406.29 °C
Turbine outlet (exhaust) temperature493.70 °C
Compressor work393.25 kJ/kg
Turbine work709.84 kJ/kg
Net work316.59 kJ/kg
Heat added797.68 kJ/kg
Thermal efficiency39.689 %
Ideal (isentropic) cycle efficiency53.871 %
Back-work ratio w_c / w_t55.400 %
Net power31.659 MW

Open this example in the calculator and change any input.

Formula

\(T_2 = T_1 + \frac{T_1 (r_p^{(\gamma-1)/\gamma} - 1)}{\eta_c}, \quad T_4 = T_3 - \eta_t\, T_3 \left(1 - r_p^{-(\gamma-1)/\gamma}\right)\)

\(w_c = c_p (T_2 - T_1), \quad w_t = c_p (T_3 - T_4), \quad \eta = \frac{w_t - w_c}{c_p (T_3 - T_2)}\)

\(\eta_{ideal} = 1 - r_p^{-(\gamma-1)/\gamma}\)

Variables

Symbol Meaning SI unit
\(T_1\) Compressor inlet temperature K
\(r_p\) Pressure ratio -
\(T_3\) Turbine inlet temperature K
\(\eta_c\) Compressor isentropic efficiency -
\(\eta_t\) Turbine isentropic efficiency -
\(c_p\) Specific heat of the air and gas J/(kg·K)
\(\gamma\) Ratio of specific heats -
\(\dot m\) Air mass flow kg/s
\(T_2\) Compressor outlet temperature K
\(T_4\) Turbine outlet (exhaust) temperature K
\(w_c\) Compressor work J/kg
\(w_t\) Turbine work J/kg
\(w_{net}\) Net work J/kg
\(q_{in}\) Heat added J/kg
\(\eta\) Thermal efficiency -
\(\eta_{ideal}\) Ideal (isentropic) cycle efficiency -
\(BWR\) Back-work ratio w_c / w_t -
\(P\) Net power W

Method and standards

The air-standard Brayton cycle with constant specific heats: isentropic compression and expansion corrected by the component isentropic efficiencies, heat added at constant pressure.

Where it is used

  • Teaching and first estimates of gas turbine performance.
  • Seeing how pressure ratio and firing temperature trade off.
  • Estimating exhaust temperature for heat recovery.

Common mistakes

  • Applying the ideal efficiency to a real machine.
  • Using one cp for air and hot gas when accuracy matters (use the gas properties calculator).
  • Mixing pressure ratio with pressure difference.

Assumptions and limits

  • Air-standard: no fuel mass, no pressure losses, constant cp and γ.
  • No cooling air or blade cooling losses.
  • One c_p and γ for air and hot gas: at 1 200 °C the gas has c_p about 1.15–1.2 kJ/(kg·K) and γ about 1.33, so a real machine differs materially. A note appears if c_p and γ imply a gas constant far from air.

References

  • Air-standard Brayton cycle (Çengel and Boles, Thermodynamics: An Engineering Approach, ch. 9)

Questions and answers

What efficiency does a pressure ratio of 15 give?

With 1 200 °C at the turbine inlet and 86 % / 89 % component efficiencies, 39.7 %; the ideal cycle at the same ratio gives 53.9 %.

What is the back-work ratio?

The share of turbine work used by the compressor: 55 % in the example. It is why component efficiencies matter so much in gas turbines.

Why is the exhaust so hot?

Expansion ends at about atmospheric pressure, so the exhaust leaves at 400–600 °C, which a heat recovery boiler can use.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.