Worked example
Example: Hugot Table 32.12 case: 25 / 2.03 / 1.50 kg/cm2. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Motive steam pressure (absolute) | 25.000 kg/cm² |
| Discharge (mixture) pressure (absolute) | 2.0300 kg/cm² |
| Suction (aspirated vapour) pressure (absolute) | 1.5000 kg/cm² |
| Efficiency factor μ/μ₀ | 0.95000 - |
| Motive steam | 5,000.0 kg/h |
| Number of effects of the evaporator | 4.0000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Saturation temperature at discharge | 120.07 °C |
| Saturation temperature at suction | 110.77 °C |
| Theoretical entrainment | 1.9076 |
| Entrainment ratio | 1.8122 |
| Vapour aspirated | 9,061.1 kg/h |
| Steam saving μq/n | 2,265.3 kg/h |
Open this example in the calculator and change any input.
Formula
\((\mu_0 + 1)^2 = \frac{80}{t_m - t_0}\left[\log\frac{P}{p_m} - 0.01(t_0 - 100)\right], \quad \mu = k\mu_0\ (k \approx 0.95), \quad e = \frac{\mu q}{n}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(P\) | Motive steam pressure (absolute) | Pa |
| \(p_m\) | Discharge (mixture) pressure (absolute) | Pa |
| \(p_0\) | Suction (aspirated vapour) pressure (absolute) | Pa |
| \(k\) | Efficiency factor μ/μ₀ | - |
| \(q\) | Motive steam | kg/s |
| \(n\) | Number of effects of the evaporator | - |
| \(t_m\) | Saturation temperature at discharge | K |
| \(t_0\) | Saturation temperature at suction | K |
| \(\mu_0\) | Theoretical entrainment | - |
| \(\mu\) | Entrainment ratio | - |
| \(y\) | Vapour aspirated | kg/s |
| \(e\) | Steam saving μq/n | kg/s |
Method and standards
Truffault's formula as given by Hugot (t in °C).
Where it is used
- Sizing thermocompressors.
- Judging thermocompression economy.
Common mistakes
- Using gauge pressures.
- Too large a temperature lift.
Assumptions and limits
- Dry saturated motive steam.
- Truffault's formula is empirical; its range of validity is not stated with it here. A compression above Hugot's 10 °C of saturation temperature is flagged.
References
- Hugot
- Handbook of Cane Sugar Engineering
- 3rd ed. (Elsevier, 1986)
- ch. 32
- thermo-compression
- eqns 32.17–32.19 and 32.27–32.30
- pp. 556–565
- Saturation temperatures from IAPWS-IF97
Questions and answers
What is the entrainment ratio?
Kilograms of low-pressure vapour drawn in per kilogram of motive steam.
Why does it fall so fast with compression?
The formula has the temperature lift in the denominator: doubling the lift roughly halves μ + 1 squared.
How much steam does it save?
About μq/n: the aspirated vapour replaces exhaust that would itself have evaporated n kilograms per kilogram.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.