FireCADCalc

Rapid (SRI) Clarifier Area, Volume and Residence

Settling area, gross area with the deflector, volume and juice residence of a short-retention (SRI) clarifier from juice flow and settling rate (Hugot ch. 29).

Sugar mill and cogenerationTank and drum

Inputs

Examples: 100 TCH SRI250 TCH

Hugot (SRI): 10 cm/min.

Results

Hugot (SRI): about 0.2 m² per t cane/h, 1.2 m deep, 20 min of juice; flocculant 1.5–3 ppm.

The residence is on the gross volume, deflector space included, with no deduction for the mud zone; the juice's real residence is shorter.

Net settling area49.479m²
Gross cross-section61.849m²
Diameter8.8740m
Volume92.773m³
Juice residence23.438min

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 100 TCH SRI. The inputs, in the units selected above:

InputValue
Crushing rate100.00 t/h
Juice volume per tonne cane1.0000 m³/t
Settling velocity100.00 mm/min
Share of the cross-section taken by the deflector25.000 %
Working depth1.2000 m

Applying the formula below gives:

ResultValue
Net settling area16.667 m²
Gross cross-section22.222 m²
Diameter5.3192 m
Volume26.667 m³
Juice residence16.000 min

Open this example in the calculator and change any input.

Formula

\(S_n = \frac{A v_j}{u}, \quad S_g = \frac{S_n}{1 - \phi_d}, \quad V = S_g H, \quad t_r = \frac{V}{A v_j}\)

Variables

Symbol Meaning SI unit
\(A\) Crushing rate kg/s
\(v_j\) Juice volume per tonne cane m³/kg
\(u\) Settling velocity m/s
\(\phi_d\) Share of the cross-section taken by the deflector -
\(H\) Working depth m
\(S_n\) Net settling area m²
\(S_g\) Gross cross-section m²
\(D\) Diameter m
\(V\) Volume m³
\(t_r\) Juice residence s

Method and standards

Settling continuity and geometry.

Where it is used

  • Selecting rapid clarifiers.
  • Checking residence times.

Common mistakes

  • Ignoring the deflector area.
  • Using settling rates without flocculant.

Assumptions and limits

  • Steady flow; good flocculation.
  • The residence uses the gross volume, including the deflector share, with no deduction for mud; the real juice residence is shorter.

References

  • Hugot
  • Handbook of Cane Sugar Engineering
  • 3rd ed. (Elsevier, 1986)
  • ch. 29
  • short-retention clarifiers
  • pp. 440–442

Questions and answers

Why short retention?

Less time at 100 °C means less inversion, colour and loss of reducing sugars.

What makes it work?

Flocculant: settling at 10 cm/min instead of about 1 cm/min in tray clarifiers.

What is the deflector?

A central cone that spreads the feed; its area does not settle mud.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.