Worked example
Example: Hugot example 100 TCH. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Crushing rate | 100.00 t/h |
| CaO per tonne cane | 18.000 kg/t |
| CaCO₃ in the limestone | 90.000 % |
| Limestone margin | 1.0500 - |
| Coke per limestone | 8.0000 % |
| Carbon in the coke | 85.000 % |
| CO₂ in the kiln gas at the pump (wet basis) | 30.000 % |
| Gas temperature at the pump | 60.000 °C |
| Gas pressure at the pump (absolute) | 680.00 mmHg |
| Pump capacity margin | 1.1000 - |
| Pump volumetric efficiency | 70.000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Limestone per tonne cane | 37.481 kg/t |
| Coke per tonne cane | 2.9985 kg/t |
| CO₂ produced per tonne cane | 24.171 kg/t |
| CO₂ density at the pump | 1.4404 kg/m³ |
| Kiln gas at the pump | 5,593.7 m³/h |
| CO₂ pump displacement | 8,790.1 m³/h |
Open this example in the calculator and change any input.
Formula
\(m_L = d\frac{M_{CaCO_3}}{M_{CaO}}\frac{k}{p}, \quad m_{CO_2} = m_L\left(p\frac{M_{CO_2}}{M_{CaCO_3}} + c_k C\frac{M_{CO_2}}{M_C}\right), \quad \dot V_p = \frac{A\,m_{CO_2}}{\rho_{CO_2}\,y_{CO_2}}\frac{k_s}{\eta_v}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(A\) | Crushing rate | kg/s |
| \(d\) | CaO per tonne cane | kg/kg |
| \(p\) | CaCO₃ in the limestone | - |
| \(k\) | Limestone margin | - |
| \(c_k\) | Coke per limestone | - |
| \(C\) | Carbon in the coke | - |
| \(y_{CO_2}\) | CO₂ in the kiln gas at the pump (wet basis) | - |
| \(T_g\) | Gas temperature at the pump | K |
| \(p_g\) | Gas pressure at the pump (absolute) | Pa |
| \(k_s\) | Pump capacity margin | - |
| \(\eta_v\) | Pump volumetric efficiency | - |
| \(m_L\) | Limestone per tonne cane | kg/kg |
| \(m_k\) | Coke per tonne cane | kg/kg |
| \(m_{CO_2}\) | CO₂ produced per tonne cane | kg/kg |
| \(\rho_{CO_2}\) | CO₂ density at the pump | kg/m³ |
| \(\dot V_g\) | Kiln gas at the pump | m³/s |
| \(\dot V_p\) | CO₂ pump displacement | m³/s |
Method and standards
Hugot's kiln and pump calculation with exact molar masses.
Where it is used
- Carbonatation and refinery lime kilns.
- CO₂ pump sizing.
Common mistakes
- Taking CaO dose as limestone.
- Using normal density at the warm pump suction.
Assumptions and limits
- Complete calcination and combustion (coke burnt fully to CO₂).
- The CO₂ fraction is on the wet gas at the pump. A dry-basis analyser reading must be reduced by (1 − p_w/p_g) first; using it directly understates the pump volume (about 25 % at 60 °C and 68 cmHg).
- The limestone margin also scales the coke and the CO₂ produced: the CO₂ from surplus limestone is counted as available gas.
References
- Hugot
- Handbook of Cane Sugar Engineering
- 3rd ed. (Elsevier, 1986)
- ch. 27
- lime kiln and CO₂ pump
- pp. 419–425 (eqns 27.1–27.3 and example)
- Stoichiometry CaCO₃ → CaO + CO₂
- C + O₂ → CO₂; ideal-gas CO₂ density
Questions and answers
Where does the CO₂ come from?
From the limestone itself and from burning the coke that heats the kiln; together about 64 kg per 100 kg limestone in Hugot's example.
Why only 25–33 % CO₂?
The nitrogen of the combustion air dilutes the gas; 40 % is the theoretical maximum.
Why such a large pump?
The gas is warm, below atmospheric pressure and mostly nitrogen, and the pump's volumetric efficiency is about 70 %.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.